DISTRIBUTED EXTERNAL SURFACE HARDENING OF CAR DESIGN BY WINDING

O. V. Fomin, A. A. Stetsko, V. Y. Osmak

Abstract


Purpose. The paper involves coverage of features and results of the research conducted by the authors to determine the feasibility and establishment of pre-stressed-strained state of freight cars by winding in order to improve their strength characteristics. It is also necessary to present the theoretical justification for the effectiveness of the application of this method for car designs and an appropriate example for the tank-car. Methodology. The conducted study is based on an analysis of known works on the subject, mathematical justification and computer modeling. At the calculations of rolling stock components contemporary conventional techniques were used. Findings. Authors found that the winding method for pre-stressed-strained state is effective and appropriate for use in the construction of railway rolling stock and, in particular freight cars. Freight car designs with the pre-stressed-strained state are characterized by a number of strength advantages, among which there is an improvement of the work on the perception of operational loads and resource conservation. Originality. For the first time it is proposed the improvement of bearing capacity of freight car constructions through the creation of its component in the directed stress-strained state. It is also for the first time proposed the use of distributed external surface hardening by the method of winding to create a pre-stress-strained state of structural components of freight cars. The methods for winding designs of freight cars and their implementation were considered. Practical value. The studies developed a number of technical solutions for improving the design of freight cars and tank-container, which has been patented. Corresponding solutions for the tank-car are partially presented. Practical implementation of such solutions will significantly improve the technical, economic and operational performances of car designs.


Keywords


railway transport; freight car; directed stress-strained state; bearing system; winding; tank-container

References


Aynabekov, A. I., Arapov, B. R., & Suleymenov, U. S. (2003). Rabota nadzemnykh predvaritelno napryazhennykh truboprovodov pri ekspluatatsionnykh nagruzkakh. Science and Education of South Kazakhstan, 35, 12-14.

Belenya, Y. I., Astryab, S. M., & Ramazanov, E. B. (1979). Predvaritelno-napryazhennyye metallicheskiye listovyye konstruktsii. Moscow: Stroyizdat.

Belenya, Y. I. (1975). Predvaritelno-napryazhennyye nesushchiye metallicheskiye konstruktsii. Moscow: Stroyizdat.

Voevodin, A. A. (1989). Predvaritelno napryazhennyye sistemy elementov konstruktsiy. Moscow: Stroyizdat.

Lovska, A. O., Fomin, O. V., Okorokov, A. M., & Melnychuk, O. M. (2015). Research of a tank-container strength of improved construction using the computer simulation of operating conditions. Science and Transport Progress, 2(56), 180-188. doi: 10.15802/stp2015/42177

Suleymenov, U. S., Moldagaliev, A. B., Zhanabay, N. Z., & Ukibaev, M. K. (2005). Perspektivy primeneniya predvaritelnogo napryazheniya v metallicheskikh konstruktsiyakh neftepererabatyvayushchey promyshlennosti. Science and Education of South Kazakhstan, 3, 51-53.

Tartakovskyi, E., Gorobchenko, O., & Antonovych, A. (2016). Improving the process of driving a locomotive through the use of decision support systems. Eastern-European Journal of Enterprise Technologies, 5, 3(83), 4-11. doi: 10.15587/1729-4061.2016.80198

Aynabekov, A. I., Suleymenov, U. S., Avramov, K. V., Moldagaliev, A. B., Kambarov, M. A., Serikbaev, T. T., & Abshenov, K. A. (2016). Experimental analysis of prestressed pipelines vibrations. Problems of Mechanical Engineering, 19(1), 21-27.

Pilatau, A. Y., Viarshyna, H. A., Gorbunov, A. V., Nozhenko, O. S., Maciel, H. S., Baranov, V. Y., & Matus, A. (2014). Analysis of syngas formation and ecological efficiency for the system of treating biomass waste and other solid fuels with CO2 recuperation based on integrated gasification combined cycle with diesel engine. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36(4), 673-679. doi: 10.1007/s40430-014-0166-7

Myamlin, S., Lingaitis, L. P., Dailydka, S., Vaičiūnas, G., Bogdevičius, M., & Bureika, G. (2015). Determination of the dynamic characteristics of freight wagons with various bogie. Transport, 30(1), 88-92. doi: 10.3846/16484142.2015.1020565

Fomin, O. V. (2015). Increase of the freight wagons ideality degree and prognostication of their evolution stages. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 3, 68-76.

Fomin, O. V. (2014). Modern requirements to carrying systems of railway general-purpose gondola cars. Metallurgical and Mining Industry, 5, 31-43.

Panchenko, S. V., Butko, T. V., Prokhorchenko, A. V., & Parkhomenko, L. O. (2016). Formation of an automated traffic capacity calculation system of rail networks for freight flows of mining and smelting enterprises. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2, 93-99.


GOST Style Citations


  1. Айнабеков, А. И. Работа надземных предварительно напряженных трубопроводов при эксплуатационных нагрузках / А. И. Айнабеков, Б. Р. Арапов, У. С. Сулейменов // Наука и образование Южного Казахстана. – 2003. – № 35. – С. 12–14.
  2. Беленя, Е. И. Предварительно-напряженные металлические листовые конструкции / Е. И. Беленя, С. М. Астряб, Э. Б. Рамазанов. – Москва : Стройиздат, 1979. – 192 с.
  3. Беленя, Е. И. Предварительно-напряженные несущие металлические конструкции / Е. И. Беленя. – Москва : Стройиздат, 1975. – 416 с.
  4. Воеводин, А. А. Предварительно напряженные системы элементов конструкций / А. А. Воеводин. – Москва : Стройиздат, 1989. – 298 с.
  5. Дослідження міцності контейнера-цистерни удосконаленої конструкції в умовах експлуатації / А. О. Ловська, О. В. Фомін, А. М. Окороков, О. М. Мельничук // Наука та прогрес транспорту. – 2015. − № 2 (56). – С. 180−188. doi: 10.15802/stp2015/42177.
  6. Перспективы применения предварительного напряжения в металлических конструкциях нефтеперерабатывающей промышленности / У. С. Сулейменов, А. Б. Молдагалиев, Н. Ж. Жанабай, М. К. Укибаев // Наука и образование Южного Казахстана. – 2005. – № 3. – С. 51–53.
  7. Тартаковський, Е. Д. Удосконалення процесу керування локомотивом шляхом використання систем підтримки прийняття рішень / Е. Д. Тартаковський, О. М. Горобченко, А. О. Антонович // Вост.-Европ. журн. передовых технологий. – 2016. – Т. 5, № (3 (83). – С. 4–11. doi: 10.15587/1729-4061.2016.80198.
  8. Экспериментальный анализ колебаний предварительно напряженных магистральных трубопроводов / А. И. Айнабеков, У. С. Сулейменов, К. В. Аврамов [и др.] // Проблемы машиностроения. – 2016. – Т. 19, № 1. – С. 21–27.
  9. Analysis of syngas formation and ecological efficiency for the system of treating biomass waste and other solid fuels with CO2 recuperation based on integrated gasification combined cycle with diesel engine / A. Y. Pilatau, H. A. Viarshyna, A. V. Gorbunov [et al.] // J. of the Brazilian Society of Mechanical Sciences and Engineering. – 2014. – Vol. 36. – Iss. 4. – P. 673–679. doi: 10.1007/s40430-014-0166-7.
  10. Determination of the dynamic characteristics of freight wagons with various bogie / S. Myamlin, L. P. Lingaitis, S. Dailydka [et al.] // Transport. – 2015. – Vol. 30. – Iss. 1. – P. 88–92. doi: 10.3846/16484142.2015.1020565.
  11. Fomin, O. V. Increase of the freight wagons ideality degree and prognostication of their evolution stages / O. V. Fomin // Науковий вісник НГУ. – 2015. – № 3. – P. 68–76.
  12. Fomin, O. V. Modern requirements to carrying systems of railway general-purpose gondola cars / О. V. Fomin // Metallurgical and Mining Industry. – 2014. – No. 5. – P. 31–43.
  13. Formation of an automated traffic capacity calculation system of rail networks for freight flows of mining and smelting enterprises / S. V. Panchenko, T. V. Butko, A. V. Prokhorchenko, L. O. Parkhomenko // Науковий вісник НГУ. – 2016. – № 2. – P. 93–99.


DOI: http://dx.doi.org/10.15802/stp2017/100232

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

 

ISSN 2307–3489 (Print)
ІSSN 2307–6666 (Online)