DISTRIBUTED EXTERNAL SURFACE HARDENING OF CAR DESIGN BY WINDING

Authors

DOI:

https://doi.org/10.15802/stp2017/100232

Keywords:

railway transport, freight car, directed stress-strained state, bearing system, winding, tank-container

Abstract

Purpose. The paper involves coverage of features and results of the research conducted by the authors to determine the feasibility and establishment of pre-stressed-strained state of freight cars by winding in order to improve their strength characteristics. It is also necessary to present the theoretical justification for the effectiveness of the application of this method for car designs and an appropriate example for the tank-car. Methodology. The conducted study is based on an analysis of known works on the subject, mathematical justification and computer modeling. At the calculations of rolling stock components contemporary conventional techniques were used. Findings. Authors found that the winding method for pre-stressed-strained state is effective and appropriate for use in the construction of railway rolling stock and, in particular freight cars. Freight car designs with the pre-stressed-strained state are characterized by a number of strength advantages, among which there is an improvement of the work on the perception of operational loads and resource conservation. Originality. For the first time it is proposed the improvement of bearing capacity of freight car constructions through the creation of its component in the directed stress-strained state. It is also for the first time proposed the use of distributed external surface hardening by the method of winding to create a pre-stress-strained state of structural components of freight cars. The methods for winding designs of freight cars and their implementation were considered. Practical value. The studies developed a number of technical solutions for improving the design of freight cars and tank-container, which has been patented. Corresponding solutions for the tank-car are partially presented. Practical implementation of such solutions will significantly improve the technical, economic and operational performances of car designs.

Author Biographies

O. V. Fomin, State Economic and Technological University of Transport

Dep. «Cars and Carriages Economy», Ohiienko I. St., 19, Kyiv, Ukraine, 03049, tel. +38 (067) 813 97 88

A. A. Stetsko, State Economic and Technological University of Transport

Dep. «Cars and Carriages Economy», Ohiienko I. St., 19, Kyiv, Ukraine, 03049, tel. +38 (063) 243 97 47

V. Y. Osmak, State Economic and Technological University of Transport

Dep. «Cars and Carriages Economy», Ohiienko I. St., 19, Kyiv, Ukraine, 03049, tel. +38 (067) 220 27 56

References

Aynabekov, A. I., Arapov, B. R., & Suleymenov, U. S. (2003). Rabota nadzemnykh predvaritelno napryazhennykh truboprovodov pri ekspluatatsionnykh nagruzkakh. Science and Education of South Kazakhstan, 35, 12-14.

Belenya, Y. I., Astryab, S. M., & Ramazanov, E. B. (1979). Predvaritelno-napryazhennyye metallicheskiye listovyye konstruktsii. Moscow: Stroyizdat.

Belenya, Y. I. (1975). Predvaritelno-napryazhennyye nesushchiye metallicheskiye konstruktsii. Moscow: Stroyizdat.

Voevodin, A. A. (1989). Predvaritelno napryazhennyye sistemy elementov konstruktsiy. Moscow: Stroyizdat.

Lovska, A. O., Fomin, O. V., Okorokov, A. M., & Melnychuk, O. M. (2015). Research of a tank-container strength of improved construction using the computer simulation of operating conditions. Science and Transport Progress, 2(56), 180-188. doi: 10.15802/stp2015/42177

Suleymenov, U. S., Moldagaliev, A. B., Zhanabay, N. Z., & Ukibaev, M. K. (2005). Perspektivy primeneniya predvaritelnogo napryazheniya v metallicheskikh konstruktsiyakh neftepererabatyvayushchey promyshlennosti. Science and Education of South Kazakhstan, 3, 51-53.

Tartakovskyi, E., Gorobchenko, O., & Antonovych, A. (2016). Improving the process of driving a locomotive through the use of decision support systems. Eastern-European Journal of Enterprise Technologies, 5, 3(83), 4-11. doi: 10.15587/1729-4061.2016.80198

Aynabekov, A. I., Suleymenov, U. S., Avramov, K. V., Moldagaliev, A. B., Kambarov, M. A., Serikbaev, T. T., & Abshenov, K. A. (2016). Experimental analysis of prestressed pipelines vibrations. Problems of Mechanical Engineering, 19(1), 21-27.

Pilatau, A. Y., Viarshyna, H. A., Gorbunov, A. V., Nozhenko, O. S., Maciel, H. S., Baranov, V. Y., & Matus, A. (2014). Analysis of syngas formation and ecological efficiency for the system of treating biomass waste and other solid fuels with CO2 recuperation based on integrated gasification combined cycle with diesel engine. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 36(4), 673-679. doi: 10.1007/s40430-014-0166-7

Myamlin, S., Lingaitis, L. P., Dailydka, S., Vaičiūnas, G., Bogdevičius, M., & Bureika, G. (2015). Determination of the dynamic characteristics of freight wagons with various bogie. Transport, 30(1), 88-92. doi: 10.3846/16484142.2015.1020565

Fomin, O. V. (2015). Increase of the freight wagons ideality degree and prognostication of their evolution stages. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 3, 68-76.

Fomin, O. V. (2014). Modern requirements to carrying systems of railway general-purpose gondola cars. Metallurgical and Mining Industry, 5, 31-43.

Panchenko, S. V., Butko, T. V., Prokhorchenko, A. V., & Parkhomenko, L. O. (2016). Formation of an automated traffic capacity calculation system of rail networks for freight flows of mining and smelting enterprises. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, 2, 93-99.

Published

2017-04-26

How to Cite

Fomin, O. V., Stetsko, A. A., & Osmak, V. Y. (2017). DISTRIBUTED EXTERNAL SURFACE HARDENING OF CAR DESIGN BY WINDING. Science and Transport Progress, (2(68), 156–165. https://doi.org/10.15802/stp2017/100232

Issue

Section

ROLLING STOCK AND TRAIN TRACTION