ВИЗНАЧЕННЯ РАМНОЇ СИЛИ ЕЛЕКТРОВОЗА ВЛ80 ПРИ РУСІ  НА КРИВИХ ДІЛЯНКАХ КОЛІЇ

A. Y. Kuzyshyn

doi:10.15802/stp2017/104343

Authors

A. Y. Kuzyshyn Lviv Research Institute of Forensic Examination, Ukraine https://orcid.org/0000-0002-3012-5395

DOI:

https://doi.org/10.15802/stp2017/104343

Keywords:

frame force, wheel set, electric locomotive, railway track, circular curve, transition curve, bogie, elevation of outer rail

Abstract

Purpose. When locomotives move in curved sections of the railway track, horizontal forces arise, which lead to pressing the ridge of the wheel pair to the railway track. The article is aimed to develop a method for determining the frame force acting on the bogie from the side of body of the locomotive section using the current methodology of calculating the lateral force. It is also aimed to determine the basic parameters that influence the value of the frame force. It is necessary to construct the dependencies of the frame force on the travel time of electric locomotive in the corresponding curve changing these parameters. Methodology. As is known, the electric locomotive is a multimass mechanical system. We will assume that this system consists of seven bodies: a body, two frames of carriages and four wheel sets. To determine the lateral force acting on the rail from the wheelset one need to solve differential equations of motion of locomotive bogie in curves of small radius. Using the equations of kinetostatics for wheelset one should come to determining the frame force acting on the car bogie from the side of body of the locomotive section. The nominal geometric and mass parameters of parts and components of electric locomotive are taken in the calculations. The curve radius, the length of transition curve, the length of circular curve, the longitudinal slope of railway track and other parameters are fixed values. Findings. There were obtained calculated values of the frame force of electric locomotive VL80 acting on the bogie from the side of body of the locomotive section. Based on the obtained results there were built the dependencies of frame force on the travel time of electric locomotive on the corresponding curve when changing the speed and corresponding elevation of the outer rail. Originality. On the basis of the existing methodology for calculating the lateral force it was developed the method for determining the frame force acting on the car bogie from the side of body of the locomotive section. Practical value. Improving the method for determining the frame force improves the accuracy of calculations when analyzing the traffic safety and when conducting the forensic rail-transport examinations.

Author Biography

A. Y. Kuzyshyn, Lviv Research Institute of Forensic Examination

Lviv Research Institute of Forensic Examination,
Lypynskyi St., 54, Lviv, Ukraine, 79024,
tel. +38 (032) 231 76 13, +38 (032) 231 70 61

References

Blokhin, Y. P., Korotenko, M. L., & Klimenko, I. V. (2013). Ob otsenke bezopasnosti ot skhoda kolesa s relsov pri ispolzovanii napravlyayushchey libo bokovoy sily. Proceedings of the 73 International Scientific & Practical Conference «Problems and Prospects of Railway Transport Development», May 23-24, 2013, Dnipropetrovsk. 81-82.

Blokhin, Y. P., Korotenko, M. L., & Klimenko, I. V. (2013). On the equivalence of safety criteria of the wheels derailment from the rails when using the directing or lateral force. Science and Transport Progress, 3(45), 74-81. doi: 10.15802/stp2013/14538

Bodnar, B. Y., Nechaiev, Y. H., & Bobyr, D. V. (2009). Teoriia ta konstruktsiia lokomotyviv. Ekipazhna chastyna. Dnipropetrovsk: Lira LTD.

Bolzhelarskyi, Y. V., Dovhaniuk, S. S., & Kuzyshyn, A. Y. (2016). Ohliad metodiv dynamichnoho vpysuvannia lokomotyviv u perekhidni ta kruhovi kryvi. Railway Transport of Ukraine, 5/6, 23-29.

Bolzhelarskyi, Y. V., & Kuzyshyn, A. Y. (2016). Comparison of the methods for calculating the lateral force from the influence of the locomotive wheel on the rail head. Electromagnetic Compatibility and Safety on railway transport, 11, 55-64.

Verigo, M. F., & Kogan, A. Y. (1986). Vzaimodeystviye puti i podvizhnogo sostava. Moscow: Transport.

Doronin, S. V. (2009). Dvizheniye mnogosektsionnykh lokomotivov v krivykh malogo radiusa. Khabarovsk: DVGUPS.

Yershkov, O. P. (1966). Raschety poperechnykh gorizontalnykh sil v krivykh. Nauchnyye trudy Vserossiyskogo nauchno-issledovatelskogo instituta zheleznodorozhnogo transporta, 301, 236.

Kutsenko, S. M. (Ed.). (1975). Dinamika ustanovivshegosya dvizheniya lokomotivov v krivykh. Kharkov: Vysshaya shkola.

Bocharov, V. I., Kodintsev, I. F., & Kravchenko, A. I. (1991). Magistralnyye elektrovozy. Obshchiye kharakteristiki: Mekhanicheskaya chast. Moscow: Mashinostroyeniye.

Sokol, E. N. (2004). Skhody s relsov i stolknoveniya podvizhnogo sostava. Sudebnaya ekspertiza. Elementy teorii i praktiki. Kyiv: Transport Ukrainy.

Chernyshev, M. A., & Kreynis, Z. M. (1985). Zheleznodorozhnyy put. Moscow: Transport.

Shakhunyants, G. M. (1987). Zheleznodorozhnyy put. Moscow: Transport.

Martínez-Casas, J., Di Gialleonardo, E., Bruni, S., & Baeza, L. (2014). A comprehensive model of the railway wheelset-track interaction in curves. Journal of Sound and Vibration, 333(18), 4152-4169. doi: 10.1016/j.jsv.2014.03.032

Zhou, G., He, C., Wen, G., & Liu, Q. (2015). Fatigue damage mechanism of railway wheels under lateral forces. Tribology International, 91, 160-169. doi: 10.1016/j.triboint.2015.07.008

Kalker, J. J. (1967). On the rolling contact of two elastic bodies in the presence of dry friction. (PhD thesis). Available from Delft University of Technology, Delft, The Netherlands.