ВИКОРИСТАННЯ БУДІВЕЛЬНО-ОРІЄНТОВАНОГО ПК SCAD ДЛЯ АНАЛІЗУ РОБОТИ МАШИНОБУДІВНИХ КОНСТРУКЦІЙ

D. О. Bannikov

doi:10.15802/stp2018/123406

Authors

D. О. Bannikov Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Ukraine

DOI:

https://doi.org/10.15802/stp2018/123406

Keywords:

Finite Element Method, SCAD software package for Windows, machine-building, structure

Abstract

Purpose. In the case of analysis of work of the machine-building structures, the direct usage of construction-oriented software developments is impossible, since ideology and methodology for solving various tasks in construction and machine-building are different. Therefore, in the conducting of practical calculations, there is a need for a certain adjustment of the approaches put in the program complexes and their adaptation to the engineering industry. The presentation of the author's experience of the construction-oriented software SCAD usage for Windows for analyzing the work of various machine-building structures, their components and assemblies is the immediate purpose of the publication. Methodology. During a long period of time the author was engaged in analyzing the work of building, mainly thin-walled, steel structures using the Finite Element Method based on the SCAD for Windows software package. At the same time, a considerable number of machine-building structures were considered, including railroad rolling stock units. Most of these tasks grew into a scientific and research problem that needed to be thoroughly researched and analyzed before giving design recommendations. Findings. The publication presents more than a dozen different tasks, typical for the machine-building industry, which the author had to deal with. Static and quasi-static problems, the problem of motion in time, the contact problem, the problem of the cracks deve-lopment, the physical and geometric non-linearity are among them. Accordingly, for each of these problems the main challenges, features and practical techniques developed during the work are presented, as well as the constructed finite element models are presented as an illustration. Originality. The experience of construction-oriented software product usage on the basis of the Finite Element Method for analyzing of the work of machine-building structures is generalized. A number of practical methods and approaches to the solution of various problems in the machine-building sphere are set forth. Practical value. The application of the given information, methods and approaches allows not only to solve concrete practical problems of the machine-building sphere, but also to obtain correct and practically acceptable solutions.

Author Biography

D. О. Bannikov, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

Dep. «Construction Production and Geodesy», Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Lazaryan St., 2, Dnipro, Ukraine, 49010,
tel. +38 (097) 532 54 46,
e-mail bdo2010@rambler.ru

References

Alyamovsky, A. A. (2015). SolidWorks Simulation. Inzhenernyy analiz dlya professionalov: zadachi, metody,rekomendatsii. Moscow: DMK Press. (in Russian)

Bannikov, D. O., & Guslistaja, A. E. (2011). Correction of results of stress calculation with FEM by HSSmethod. Bulletin of Dnipropetrovsk National University of Railway Transport named after AcademicianV. Lazaryan, 38, 134-141. (in Russian)

Bannikov, D. O. (2017). Otsinka praktychnoi zbizhnosti rezultativ analizu plastynchastykh modelei v metodiskinchenykh elementiv. Novi tekhnolohii v budivnytstvi, 32, 26-31. (in Ukranian)

Vodopyanov, R. Y., Titok V. P., & Artamonova, A. E. (2014). Programmnyy kompleks Lira-SAPR 2014. Rukovodstvo polzovatelya. Obuchayushchie primery. Moscow: Elektronnoe izdanie. (in Russian)

Guslistaja, A. E., & Bannikov, D. O. (2011). Estimation of the importance of taking into account the nonlinear properties of the system "structure-soil array" in determining its stress-strain state. Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, 37, 155-160. (in Ukranian)

Zhilkin, V. A. (2016). Modelirovanie i staticheskiy raschet elementov konstruktsiy v MSC Patran-Nastran-Marc: Uchebnoe posobie. Moskow: Prospekt nauki. (in Russian)

Zenkevitch, O., & Pobedrya, B. Y. (Ed). (1975). Metod konechnykh elementov v tekhnike: Perevod s angliyskogo. Moscow: Mir. (in Russian)

Kaplun, A. B., Morozov, E. M., & Shamraeva M. A. (2015). ANSYS v rukakh inzhenera: Prakticheskoe rukovodstvo. Moscow: Librocom. (in Russian)

Kachurenko, V. V., & Bannikov, D. O. (2016). Konstruktivnye resheniya stalnykh emkostey dlya sypuchikh materialov. Dnipropetrovsk: Novaja ideologia. (in Russian)

Normy dlya rascheta i otsenka prochnosti nesushchikh elementov, dinamicheskikh kachestv i vozdeystviya naput ekipazhnoy chasti lokomotivov zheleznykh dorog MPS RF kolei 1520 mm. (1998). Moscow: MPS RF:VNIIZhT. (in Russian)

Normy rascheta i proektirovaniya vagonov zheleznykh dorog MPS RF kolei 1520 (nesamokhodnykh). (1996). Moscow: GosNIIV: VNIIZhT. (in Russian)

Karpilovsky, V. S., Kriksunov, E. Z., Maljarenko, A. A., Fialko, S. Y., Perelmuter, A. V., & Perelmuter, M. A. (2015). SCAD Office. Versiya 21. Vychislitelnyy kompleks SCAD++. Moscow: SKAD SOFT. (in Russian)

Dow, J. O. (2015). A Concise Overview of the Finite Element Method. New York: Momentum Press. (in English)

Ebrahimi, F. (Ed). (2012). Finite Element Analysis-New trends and Developments. London: InTech. doi: 10.5772/3352. (in English)

Gatica, G. N. (2014). A Simple Introduction to the Mixed Finite Element Method: Theory and Application. Cham: Springer. doi: 10.1007/978-3-319-03695-3. (in English)

Liu, G. R., & Quek, S. S. (2014). The Finite Element Method. A Practical Course. Amsterdam: Elsevier LTD. doi: 10.1016/b978-0-08-098356-1.00014-x. (in English)

Onwubolu, G. (2015). Front matter. In G. Onwubolu (Ed.), Applied Mechanics with SolidWorks. (pp. i-xvii) London. doi: 10.1142/9781783263813_fmatter. (in English)

Zhuang, Z., Liu, Z., Cheng, B., & Liao, J. (2014). Overview of Extended Finite Element. Extended Finite Element Method, 1, 6-12. doi: 10.1016/b978-0-12-407717-1.00001-7. (in English)

Thompson, M. K., & Thomson, J. M. (2017). Interacting with ANSYS. ANSYS Mechanical APDL for Finite Element Analysis, 1(11-30). doi: 10.1016/B978-0-12-812981-4.00002-2. (in English)