STUDY OF THE EFFECT OF PRELIMINARY PLASTIC DEFORMATION IN THE PROCESS OF DISSOLUTION DURING TEMPERING OF LOW-CARBON AND BORON-CONTAINING ALLOYS

Authors

  • M. Yu. Filonenko Ukrainian State University of Chemical Technology, Dnipropetrovsk, Ukraine
  • S. B. Piliaieva DNU named after O. Honchar, Dnipropetrovsk, Ukraine

DOI:

https://doi.org/10.15802/stp2009/14149

Keywords:

plastic deformation, the process of decay, high-carbon steel, boron alloy

Abstract

In the paper the influence of preliminary deformation on disintegration of martensite in boron-containing and carbonic alloy is explored. It is shown that at the small degree of deformation (7 per cent) both in low-carbonic and boron-containing alloys the process of martensite disintegration takes place less intensively. The increase of degree of preliminary deformation in a boron-containing alloy is instrumental in more even distribution of boron-cementite particles appearing as a result of martensite disintegration.

Author Biographies

M. Yu. Filonenko, Ukrainian State University of Chemical Technology, Dnipropetrovsk

M. Yu. Filonenko

S. B. Piliaieva, DNU named after O. Honchar, Dnipropetrovsk

S. B. Piliaieva

Published

2009-10-25

How to Cite

Filonenko, M. Y., & Piliaieva, S. B. (2009). STUDY OF THE EFFECT OF PRELIMINARY PLASTIC DEFORMATION IN THE PROCESS OF DISSOLUTION DURING TEMPERING OF LOW-CARBON AND BORON-CONTAINING ALLOYS. Science and Transport Progress, (29), 202–205. https://doi.org/10.15802/stp2009/14149

Issue

Section

MATERIAL SCIENCE