THE INFLUENCE OF THE SHAPE OF THE INGOT AND THE VACUUM ON THE SULPHUR CONTENT S WHEEL STEEL КП-2

Authors

  • O. M. Shapovalova Dnipropetrovski national University.named after O. Gonchar, Ukraine
  • A. V. Deineha Dnipropetrovski national University.named after O. Gonchar, Ukraine

DOI:

https://doi.org/10.15802/stp2009/14152

Keywords:

shape, ingot, evacuation, sulfur, wheel steel

Abstract

From positions of thermodynamics the conditions of formation of sulfides in the steels are described. The regularity of sulfur distribution of in the industrial vacuumized bars from the wheel steel of mark КП-2 is first elucidated. The chemical composition of non-metal inclusions in the wheel steel produced according to different technologies is determined.

Author Biographies

O. M. Shapovalova, Dnipropetrovski national University.named after O. Gonchar

O. M. Shapovalova

A. V. Deineha, Dnipropetrovski national University.named after O. Gonchar

A. V. Deineha

Downloads

Published

2009-08-25

How to Cite

Shapovalova, O. M., & Deineha, A. V. (2009). THE INFLUENCE OF THE SHAPE OF THE INGOT AND THE VACUUM ON THE SULPHUR CONTENT S WHEEL STEEL КП-2. Science and Transport Progress, (28), 189–193. https://doi.org/10.15802/stp2009/14152

Issue

No. 28 (2009): ISSUE 28

Section

MATERIAL SCIENCE

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.