Features of the high frequency power transformer calculation
DOI:
https://doi.org/10.15802/stp2013/14535Keywords:
single-phase bridge voltage inverter, high voltage transformer, short-circuit voltage, transient process, time constantAbstract
Purpose. The windings of power transformers have low resistance value and a most inductance, which reduces the rate of rise of current in the windings. Therefore, when the estimated amount of current is set one should make sure of the possibility of achieving it. As inductance is characterized by a short-circuit voltage, it is necessary to develop a technique for determining the maximum magnitude of the current in the windings of the transformer according to the short-circuit voltage and operating frequency. Methodology. The classical method of calculation of transient processes to determine the value of the transient current of the transformer windings to achieve purpose is used. Findings. The nature of the transient current in the windings of high-frequency transformer, which is powered by a voltage inverter is investigated and analyzed. Originality. The method for determining the maximum amount of current depending on the short-circuit voltage and frequency of the applied voltage with other set-up parameters was proposed. Practical value. The proposed method allows determining the maximum value of the current in the windings of the high-frequency transformer including its RL-parameters. This will let compare the value of a given current with possible depending on short-circuit voltage and frequency of the applied voltage. Research material may be applied for power transformers design.
References
Amorfnyye splavy i ekonomiya (Amorphous alloys and economy). Available at: http://forca.ru/stati/podstancii/amorfnye-splavy-i-ekonomiya.html (Accessed 03 June 2013).
Visin M.H., Zabarylo D.O. Shestyvisnyi mahistralnyi vantazhnyi elektrovoz podviinoho zhyvlennia iz zastosuvanniam promizhnoho transformatora z vysokochastotnoiu rozviazkoiu i z asynkhronnymy tiahovymy dvyhunamy [Six axel mainline freight double feed electric locomotive using the transformer with high-frequency junction and asynchronous tractive motors]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2011, issue 36, pp. 132-136.
Visin M.H., Zabarylo D.O. Pidvyshchennia elektromahnitnoi sumisnosti reikovykh kil z elektrorukhomym skladom podviinoho zhyvlennia z asynkhronnymy tiahovymy dvyhunamy ta tiahovoiu merezheiu [Improving of electromagnetic compatibility of rail circuits with double feed electric rolling stock with asynchronous tractive motors and with power supply system]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2012, issue 40, pp. 75-82.
Voldek A.I. Elektricheskiye mashyny [Electrical machines]. Lvov, Energyia Publ., 1978. 832 p.
Gottlib I.M. Istochniki pitaniya. Invertory, konvertory, lineynyye i impulsnyye stabilizatory [Sources of supply. Inverters, converters, linear and switching regulators]. Moscow, Postmarket Publ., 2002. 544 p.
Zabrodin Yu.S. Promyshlennaya elektronika [Industrial electronics]. Moscow, Vysshaya shkola Publ., 1982. 496 p.
Zolotukhin I.V. Fizicheskiye svoystva amorfnykh metallicheskikh splavov [The physical properties of amorphous metallic alloys]. Moscow, Metallurgiya Publ., 1986. 175 p.
Kopylov I.P. Elektricheskiye mashiny [Electrical machines]. Moscow, Energoatomizdat Publ., 1986. 256 p.
Kulik V.D. Silovaya elektronika. Avtonomnyye invertory, aktivnyye preobrazovateli [Power electronics. Autonomous inverters, active transducers]. Saint Petersburg, GOUVPO SPbGTURP Publ., 2010. 90 p.
Mek R. Impulsnyye istochniki pitaniya. Teoreticheskiye osnovy proyektirovaniya i rukovodstvo po prakticheskomu primeneniyu [Switching power supplies. Design Theory and guidance on the practical application]. Moscow, Izdatelskiy dom «Dodeka-KhKhІ» Publ., 2008. 272 p.
Starodubtsev Yu.N., Belozerov V.Ya. Magnitnyye svoystva amorfnykh i nanokristallicheskikh splavov [Magnetic properties of amorphous and nanocrystalline alloys]. Yekaterinburg, Uralskiy Universitet Publ., 2002. 186 p.
Zeveke G.V., Ionkin P.A., Netushil A.V, Strakhov S.V. Osnovy teorii tsepey [Basics of circuit theory]. Moscow, Energoatomizdat Publ., 1989. 528 p.
Kunz M., Hörl F., Klockw Th. Entvicklung einer massearmen Energieversongung für elektrische Triebfahrzeuge. ZEV, DET Glassers Annalen, Die Eisenbahntechnik, 1999, vol. 123, no. 11,12. p. 423-426.
Liu Y., Eberle W. Developments in Switching Mode Supply Technologies. IEEE Canadian Re-view. Switching Mode Power Supplies, 2009. no. 61, pp. 9-14.
Victor M. Energieumwandlung aut AC-Triebfarzeugen mit Mittle frequen ztansformator. EB: Elekrtische Bahnen, 2005, vol. 103, no. 11, pp. 505-510.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
