Stress-strain state of the flat steel cord rubber of traction unit on the reel

Authors

  • S. Ye. Blokhin National mining University, Ukraine
  • D. L. Kolosov National mining University, Ukraine
  • A. L. Kolosov Moscow State University Of Technologies And Management, Russia, Russian Federation

DOI:

https://doi.org/10.15802/stp2009/14608

Keywords:

stress-strain state, traction body, drum

Abstract

The finite-element model for calculating the stress-deformed state of rubber-ropes conveyer’s belt on the drum is developed.

Author Biographies

S. Ye. Blokhin, National mining University

С. Е. Блохин, д.т.н., профессор

D. L. Kolosov, National mining University

Д. Л. Колосов

A. L. Kolosov, Moscow State University Of Technologies And Management, Russia

А. Л. Колосов

Downloads

Published

2009-12-25

How to Cite

Blokhin, S. Y., Kolosov, D. L., & Kolosov, A. L. (2009). Stress-strain state of the flat steel cord rubber of traction unit on the reel. Science and Transport Progress, (30), 88–91. https://doi.org/10.15802/stp2009/14608

Issue

No. 30 (2009): ISSUE 30

Section

ROLLING STOCK AND TRAIN TRACTION

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.