THE METHOD OF CONSTRUCTION OF THE SPRAYING OF THE CONCRETE LINING IN THE VERTICAL OPENINGS

Authors

  • S. V. Borshchevskyi Donetsk National Technical University, Ukraine
  • V. I. Kamenets Donetsk National Technical University, Ukraine
  • O. O. Driuk Donetsk National Technical University, Ukraine

DOI:

https://doi.org/10.15802/stp2008/16727

Keywords:

hole, spill-concrete wall, vertical mine

Abstract

The method of building the spill-concrete walls in mine holes of large diameter is analyzed. The variant of calculation of thickness of spill-concrete walls using such a method is offered. The recommendation on perfection of technology of timbering the mine holes of large diameter with a purpose of providing the durability and cost efficiency during the building of walls in vertical mines is proposed.

Author Biographies

S. V. Borshchevskyi, Donetsk National Technical University

S. V. Borshchevskyi

V. I. Kamenets, Donetsk National Technical University

V. I. Kamenets

O. O. Driuk, Donetsk National Technical University

O. O. Driuk

Downloads

Published

2008-02-25

How to Cite

Borshchevskyi, S. V., Kamenets, V. I., & Driuk, O. O. (2008). THE METHOD OF CONSTRUCTION OF THE SPRAYING OF THE CONCRETE LINING IN THE VERTICAL OPENINGS. Science and Transport Progress, (20), 107–110. https://doi.org/10.15802/stp2008/16727

Issue

No. 20 (2008): ISSUE 20

Section

TRANSPORT CONSTRUCTION

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.