THE METHOD OF DETERMINING THE POSITION OF THE ANCHOR ON THE VALUE OF THE INDUCTANCE OF THE WINDING OF THE RELAY

Authors

  • V. I. Gavryliuk Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Ukraine https://orcid.org/0000-0001-9954-4478
  • V. I. Profatylov Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, Ukraine

DOI:

https://doi.org/10.15802/stp2007/17372

Keywords:

electromagnetic relay, current, railway automatic

Abstract

The method of definition of a relay anchor situation on inductance of a winding of the relay is offered in the given paper. The method is based, that the working air backlash decrees at the switching on a relay. It follows to the increase of winding inductance, which does not depend on a current practically and it determined by size of an air backlash between an anchor and core. It allows us to automation measurements of mechanical parameters of electromagnetic relays of railway automatics without removal of casing in the accordance with the operating-technical requirements.

Author Biographies

V. I. Gavryliuk, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

V. I. Gavryliuk

V. I. Profatylov, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

V. I. Profatylov

Downloads

Published

2007-12-25

How to Cite

Gavryliuk, V. I., & Profatylov, V. I. (2007). THE METHOD OF DETERMINING THE POSITION OF THE ANCHOR ON THE VALUE OF THE INDUCTANCE OF THE WINDING OF THE RELAY. Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, (19), 13–17. https://doi.org/10.15802/stp2007/17372

Issue

No. 19 (2007): ISSUE 19

Section

AUTOMATED AND TELEMATIC SYSTEMS ON TRANSPORT

License

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).