MONITORING THE CONDITION OF THE WHEELS DURING MOVEMENT OF THE ROLLING STOCK

Authors

  • Yu. I. Osenin East Ukrainian national University named after Vladymyr Dahl, Ukraine
  • V. P. Voitenko East Ukrainian national University named after Vladymyr Dahl, Ukraine

DOI:

https://doi.org/10.15802/stp2007/17867

Keywords:

movement, condition of the wheels, rolling stock

Abstract

The possibility of adaptation and use of the method of synthesized focusing aperture for checking the condition of wheels during movement of the vehicle is substantiated. A set of equations for the determination of defect location in a wheel is obtained and a formula for restoration of the defect image is improved. An on-board device for continuous monitoring of the condition of wheels during the vehicle movement is suggested.

 

Author Biographies

Yu. I. Osenin, East Ukrainian national University named after Vladymyr Dahl

Yu. I. Osenin

V. P. Voitenko, East Ukrainian national University named after Vladymyr Dahl

V. P. Voitenko

Published

2007-02-25

How to Cite

Osenin, Y. I., & Voitenko, V. P. (2007). MONITORING THE CONDITION OF THE WHEELS DURING MOVEMENT OF THE ROLLING STOCK. Science and Transport Progress, (14), 142–145. https://doi.org/10.15802/stp2007/17867

Issue

Section

ROLLING STOCK AND TRAIN TRACTION