SIMULATION OF THE FOLDING PROCESS OF THE SHEET OF MATERIAL IN THE SLEEVE

Authors

  • L. O. Hubacheva East Ukrainian national University named after Vladymyr Dahl, Ukraine

DOI:

https://doi.org/10.15802/stp2006/18751

Keywords:

bush, seam, process modeling

Abstract

The simulation of a rolling-up process after preliminary twоangle bending of the billet into a bushing is studied. A selection of optimum sizes for the billet, providing closing of a joint, has been made.

Author Biography

L. O. Hubacheva, East Ukrainian national University named after Vladymyr Dahl

L. O. Hubacheva

Downloads

Published

2006-09-25

How to Cite

Hubacheva, L. O. (2006). SIMULATION OF THE FOLDING PROCESS OF THE SHEET OF MATERIAL IN THE SLEEVE. Science and Transport Progress, (12), 170–174. https://doi.org/10.15802/stp2006/18751

Issue

No. 12 (2006): ISSUE 12

Section

TRANSPORT CONSTRUCTION

License

Copyright and Licensing

This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.

The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.