DYNAMIC PROPERTIES OF ONE-STOREY INDUSTRIAL BUILDING

D. V. Rozumenko; D. О. Bannikov

doi:10.15802/stp2020/199378

Authors

D. V. Rozumenko Dnipro National University of Railway Transport named after Academician V. Lazaryan, Ukraine https://orcid.org/0000-0001-6058-9417
D. О. Bannikov Dnipro National University of Railway Transport named after Academician V. Lazaryan, Ukraine https://orcid.org/0000-0002-9019-9679

DOI:

https://doi.org/10.15802/stp2020/199378

Keywords:

industrial building, modal analysis, dynamic characteristics, finite element method, complex Lira for Windows

Abstract

Purpose. Recently, there has been a growing demand in Ukraine for the reuse of industrial buildings that have not been in exploitation for a certain period of time. At the same time, there are frequent cases when new technological equipment transfers significant dynamic loads to existing structures over a long period of time. Since the available data regarding the dynamic properties of industrial buildings are now practically absent, the main goal of the studies made by the authors is to evaluate and analyze own dynamic characteristics of a one-storey industrial building. Methodology. To achieve this goal, it was necessary first to choose the type of industrial building, which is common enough for the formulated conditions of the reuse possibility. A one-storey unheated industrial building with three purlins (purlins 15 + 15 + 6 m) with a steel supporting frame was taken as such a building. In the course of research, the cross sections of the main load-bearing elements were varied, as well as the schemes of their connection with each other. The calculations were carried out by the finite element method based on the Lira for Windows project complex. Findings. The obtained frequency spectra of the own dynamic characteristics for the main bearing structural elements of an industrial building of the type in question are in the range up to 30 Hz. Also, during the research, dependencies were obtained for changing this range for various cases of design decisions of the building. Originality. The research results presented in the publication make it possible to evaluate the range of the own dynamic characteristics of single-storey multipurlined unheated industrial buildings with the traditional structural solution of the steel frame. Practical value. The resulting range of the own dynamic characteristics of the industrial building of the type in question is quite dangerous for human health. The most unfavorable is the oscillation form of the columns, which actually involves the entire structural frame. Therefore, in the course of research, a special method was developed and tested to stabilize such vibrations «on the base» using flexible ropes.

Author Biographies

D. V. Rozumenko, Dnipro National University of Railway Transport named after Academician V. Lazaryan

Fac. «Industrial and Civil Engineering», Dnipro National University of Railway Transport named after Academician V. Lazaryan, Lazaryana St., 2, Dnipro, Ukraine, 49010, tel. +38 (099) 681 68 38, e-mail dmitriy.rozumenko.v@gmail.com

D. О. Bannikov, Dnipro National University of Railway Transport named after Academician V. Lazaryan

Dep. «Construction Production and Geodesy», Dnipro National University of Railway Transport named after Academician V. Lazaryan, Lazaryana St., 2, Dnipro, Ukraine, 49010, tel. +38 (063) 400 43 07, e-mail bdo2020@yahoo.com

References

Bannikov, D. O. (2017). Ocinka praktychnoji zbizhnosti rezuljtativ analizu plastynchastykh modelej v metodi skinchenykh elementiv. New Technologies in Construction, 32, 26-31. (in Ukrainian)

Bannikov, D. O., & Huslista, G. E. (2011). Otsenka skhodimosti napryazheniy v slozhnykh metallokonstruktsiyakh metodom konechnykh elementov, Metallurgical and Mining Industry, 4, 93-96. (in Russian)

Buga, P. G. (2013). Grazhdanskie, promyshlennye i selskokhozyaystvennye zdaniya: monografiya. Moscow: Kniga po trebovaniju. (in Russian)

Zakhyst vid nebezpechnykh gheologhichnykh procesiv, shkidlyvykh ekspluatacijnykh vplyviv, vid pozhezhi. Budivnyctvo u sejsmichnykh rajonakh Ukrajiny, 84 DBN В. 1.1-12:2006 (2006). (in Ukrainian)

Systema nadiinosti ta bezpeky v budivnytstvi. Navantazhennia i vplyvy. Normy proektuvannia, 70 DBN В.1.2-2:2006 (2007). (in Ukrainian)

Stalevi konstruktsii. Normy proektuvannia, 205 DBN В.2.6-198:2014 (2014). (in Ukrainian)

Kazakevitch, M. I., & Kuljabko, V. V. (1996). Vvedenie v vibroekologiyu zdaniy i sooruzheniy: monografiya. Dnepropetrovsk, PGASA. (in Russian)

Kazakevitch, M. I. (2011). Problems of cable stabilization. Metall Structures, 17(2), 63-84. (in Russian)

Redchenko, V. P. (2016). Dynamichni vyprobuvannja mostiv. Zaghaljni polozhennja, spektraljnyj analiz, dynamichni kharakterystyky: monoghrafija. Part 1. Dnipro, Porogi. (in Ukrainian)

Redchenko, V. P. (2017). Dynamichni vyprobuvannja mostiv. Viljni kolyvannja, modaljnyj kontrolj: monoghrafija. Part 2. Dnipro, Porogi. (in Ukrainian)

Strelec-Streleckij, E. B., Zhuravlev, A. V., & Vodop'janov, R. Ju. (2019). LIRA-SAPR. Kniga I. Osnovy. Kiev: LIRALAND. (in Russian)

Bofang, Z. (2018). The Finite Element Method: Fundamentals and Applications in Civil, Hydraulic, Mechanical and Aeronautical Engineering. Singapore: John Wiley & Sons Singapore Pte. Ltd. DOI: https://doi.org/10.1002/9781119107323 (in English)

Johnson, R. P. (2018). Composite Structures of Steel and Concrete: Beams, Slabs, Columns and Frames for Buildings. Wiley Blackwell. DOI: https://doi.org/10.1002/9781119401353 (in English)

Kruhlikova, N. G., & Bannikov, D. O. (2019). Rational design of shot-span industrial building roof for reconstruction conditions. Science and Transport Progress, 2(80), 144-152. DOI: https://doi.org/10.15802/stp2019/165853 (in English)

Neduzha, L. O., & Shvets, A. O. (2018). Theoretical and experimental research of strength properties of spine beam of freight cars. Science and Transport Progress, 1(73). 131-147. DOI: https://doi.org/10.15802/stp2018/123457 (in English)

Shames, I. H. (2017). Energy and Finite Element Methods In Structural Mechanics. New York: Routledge. DOI: https://doi.org/10.1201/9780203757567 (in English)

Singiresu, S. R. (2018). The Finite Element Method in Engineering: 6th Edition. Elsevier Inc. DOI: https://doi.org/10.1016/c2016-0-01493-6 (in English)