DETERMINATION OF THE STABILITY OF FREIGHT CARS TAKING INTO ACCOUNT THE RAILWAY TRACK PARAMETERS

Authors

DOI:

https://doi.org/10.15802/stp2020/203421

Keywords:

traffic safety, lift resistance coefficient, longitudinal forces, track strength calculation, movement speed

Abstract

Purpose. For prospective speed increase in the work is aimed to consider the complex conditions of the dynamic interaction of the railway track with rolling stock. The nature and level of this interaction depends both on the design of the unit of rolling stock, its state and speed, and on the design and condition of the track itself. Methodology. Evaluation of the possible rolling stock impact on the track was investigated by the analytical method. The track stress state was determined by calculation using dependencies between force factors and the characteristics of the stress-strain state of the track. When determining the static pressure of the wheel on the rail, the influence of rolling stock skews in the rail track according to the “herringbone” scheme is considered, in which the additional lateral effect of the wheel pairs of the bogies on the track structure is maximal. Findings. When conducting theoretical studies, the dependencies of the lift resistance coefficient by longitudinal forces were obtained taking into account various types of inertia forces on irregularities both on the wheel and on the rail thread. The values of the friction coefficient in the wheel-rail contact on the movement speed were also obtained. Originality. For the first time, the rules for calculating the railway track for strength and determining the dynamic loading of the rail carriage are combined. This improvement will make it possible to calculate the structural speed of the car based on the axial loads, inertia forces due to the wheel and rails` irregularities, and also take into account the longitudinal quasistatic forces arising in the train during braking modes. Practical value. Determination of the car lift resistance coefficient using the above methodology will allow a more thorough consideration and justification of the cause of wheelset derailment. The application of this calculation method will allow us to determine the strength of the railway track and the ballast layer, taking into account the uneven load of rail threads in the case of distortions of the freight rolling stock under the action of compressive quasistatic longitudinal forces.

Author Biography

A. O. Shvets, Dnipro National University of Railway Transport named after Academician V. Lazaryan

Dep. «Theoretical and Structural Mechanics», Dnipro National University of Railway Transport named after Academician
V. Lazaryan, Lazaryana St., 2, Dnipro, Ukraine, 49010, tel. +38 (050) 214 14 19, e-mail angela_Shvets@ua.fm

References

Danilenko, E. I. (2010). Zaliznychna koliia. (Vol. 2). Kyiv: Inpres. (in Ukrainian)

Pravyla rozrakhunkiv zaliznychnoi kolii na mitsnist i stiikist: TsP-0117: zatv. nakazom Ukrzaliznytsi vid 13.12.2004 r. №960-TsZ. (2004). Kyiv: TsP UZ. (in Ukrainain)

Vahony vantazhni. Zahalni vymohy do rozrakhunkiv ta proektuvannia novykh i modernizovanykh vahoniv kolii 1520 mm (nesamokhidnykh), 158 DSTU 7598:2014 (2017). (in Ukrainian)

Kurhan, D. M. (2015). Determination of Dynamic Loads from the Wheel on the Rail for High-Speed Trains. Science and Transport Progress, 3(57), 118-128. DOI: https://doi.org/10.15802/stp2015/46069 (in Ukrainian)

Kurhan, D. M. (2017). Methodology for Calculating the Railway Track at Interaction with Fast-speed Rolling Stock. (Avtoreferat dysertatsii doktora tekhnichnykh nauk). Dnipro. (in Ukrainian)

Petrenko, V. D., Tiutkin, O. L., & Krysan, V. I. (2019). Restoring the Strength and Deformation Characteristics of the Subgrade and its Foundation by Reinforcing With Soil-Cement Elements. Bridges and tunnels: Theory, Research, Practice, 16, 65-74. DOI: https://doi.org/10.15802/bttrp2019/189681(in Ukrainian)

Shvets, A. O. (2019). Gondola cars dynamics from the action of longitudinal forces. Science and Transport Progress, 6(84), 142-155. DOI: https://doi.org/10.15802/stp2019/195821 (in Ukrainian)

Shvets, A. O. (2020). Stability of freight wagons under the action of compressing longitudinal forces. Science and Transport Progress, 1(85), 119-137. DOI: https://doi.org/10.15802/stp2020/199485 (in Ukrainian)

Radkevych, A. V., Petrenko, V. D., Tiutkin, O. L., Andrieiev, V. S., & Mukhina, N. A. (2019). Comparative analysis of the parameters of the strength of the subgrade at the transition to the higher axial loading up to 25 t. IOP Conference Series: Materials Science and Engineering, 708, 1-8. DOI: https://doi.org/10.1088/1757-899X/708/1/012024 (in English)

Kurhan, D. (2016). Determination of Load for Quasi-static Calculations of Railway Track Stress-strain State. Acta Technica Jaurinensis, 9(1), 83-96. DOI: https://doi.org/10.14513/actatechjaur.v9.n1.400 (in English)

Published

2020-05-20

How to Cite

Shvets, A. O. (2020). DETERMINATION OF THE STABILITY OF FREIGHT CARS TAKING INTO ACCOUNT THE RAILWAY TRACK PARAMETERS. Science and Transport Progress, (2(86), 103–118. https://doi.org/10.15802/stp2020/203421

Issue

Section

ROLLING STOCK AND TRAIN TRACTION