УДОСКОНАЛЕННЯ СТЕНДА ДЛЯ КОМПЛЕКСНОГО ДІАГНОСТУВАННЯ ВУЗЛІВ ВАНТАЖНИХ ВАГОНІВ

V. G. Ravlyuk

doi:10.15802/stp2020/213444

Authors

V. G. Ravlyuk Ukrainian State University of Railway Transport, Ukraine https://orcid.org/0000-0003-4818-9482

DOI:

https://doi.org/10.15802/stp2020/213444

Keywords:

diagnostic stand, brake pad, diagnosing, testing, wear, wheel set, freight car, axle box

Abstract

Purpose. This research is aimed at improving the design of the stand for the comprehensive diagnosis of axle boxes with rolling bearings and the study of the performance of brake pads of freight cars. Methodology. The expediency and possibility of improvement of the stand for carrying out of complex diagnostics of subsystems of axle boxes with rolling bearings and brake pads of freight cars concerning revealing their working capacity by application of operational loadings is substantiated. As a methodological development of this scientific direction, from the point of view of researches of diagnosing objects efficiency on the stand wear of tribotechnical pairs - friction surfaces of pads and wheels at braking is investigated. To assess the results of wear, the traditional test method is used by pressing the indenter into the appropriate friction surfaces. Findings. Expanding the capabilities of the stand for diagnosing axle boxes of freight cars with the possibility of testing for different types of brake pads of cars was obtained. During researches on the stand real operational conditions of work of wheel pair at diagnostics of subsystems of axle boxes and brake pads are created. During the study, different modes of wheel load are applied, the required humidity is provided and blowing is carried out in the test area of the counter pairs friction, as well as the temperature arising on the surfaces of brake pads and wheels is registrated using a special device. Originality. The concept of improvement of the diagnostic stand for researches of axle boxes is theoretically proved and practically confirmed. For the first time with the help of an advanced stand, it is possible to study different types of brake pads of cars, to identify the phenomena of formation of different types of wear and provide recommendations for increasing their life. Practical value. The results of research conducted on an advanced stand can be used in the design and modernization of such subsystems of innovative freight cars as axle boxes with rolling bearings and brake pads. An application for an invention has been submitted for an improved stand for complex research.

Author Biography

V. G. Ravlyuk, Ukrainian State University of Railway Transport

Dep. «Cars», Ukrainian State University of Railway Transport, Feuerbach Sq., 7, Kharkiv, Ukraine, 61500, tel. +38 (057) 730 10 35, e-mail ravvg@ukr.net

References

Instruktsiia z ekspluatatsii halm rukhomoho skladu na zaliznytsiakh Ukrainy: TsT-TsV-TsL-0015, No. 264-Ts. (2004). Kyiv. (in Ukrainian)

Petrakov, D. I. (2011). Ispol'zovanie naturnyh ispytatel'nyh ustanovok dlya issledovaniya tyagovyh kachestv podvizhnogo sostava. Mir transporta i tekhnologicheskih mashin, 4, 51-55. (in Russian)

Ravlyuk, V. G. (2019). Investigation of features of dual wear of pads in brake system of freight cars. Science and Transport Progress, 2(80), 111-126. DOI: https://doi.org/10.15802/stp2019/166114 (in Ukrainian)

Sistema diagnostiki mekhanizmov OMSD-02. Rukovodstvo po ekspluatacii. PO 086.00.00.000 RE. (2006). (in Russian)

Martynov, I. E., Ravlyuk, V. G., Nechvoloda, S. I., Mykhalkiv, S. V., Nechvoloda, K. S., Ravliuk, M. G., & Trufanova, A. V. (2012). UA Patent № 99206 Ukrainskyi instytut intelektual noivlasnosti (Ukrpatent)

Eremeev, V. K., Cvik, L. B., Kuleshov, A. V., & Zapol'skij, D. V. (2011). RU Patent № 2436061 Federal service for intellectual property (Russian Federation)

Shakina, A. V. (2014). Razrabotka effektivnoy tekhnologii polucheniya vagonnoy tormoznoy kolodki iz metallokeramicheskogo friktsionnogo materiala (PhD dissertation). Komsomolsk on Amur, Russia. (in Russian)

Cheng, Z. (2017). Residual Useful Life Prediction for Rolling Element Bearings Based on Multi-feature Fusion Regression. 2017 International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC) (pp. 246-250). Shanghai, China. DOI: https://doi.org/10.1109/SDPC.2017.54 (in English)

Fomin, O., Lovska, A., Kovtun, O., & Nerubatskyi, V. (2020). Defining patterns in the longitudinal load on a train equipped with the new conceptual couplers. Eastern-European Journal of Enterprise Technologies, 2/7(104), 33-40. DOI: https://doi.org/10.15587/1729-4061.2020.198660 (in English)

Gerlici, J., Gorbunov, M., Kravchenko, K., Prosvirova, O., Lack, T., & Hauser, V. (2018). Assessment of Innovative Methods of the Rolling Stock Brake System Efficiency Increasing. Manufacturing Technology, 18(1), 35-38. DOI: https://doi.org/10.21062/ujep/49.2018/a/1213-2489/mt/18/1/35 (in English)

Gu, X., Yang, S., Liu, Y., & Hao, R. (2018). A novel Pareto-based Bayesian approach on extension of the infogram for extracting repetitive transients. Mechanical Systems and Signal Processing, 106, 119-139. DOI: https://doi.org/10.1016/j.ymssp.2017.12.034 (in English)

Iwnicki, S. (2006). Handbook of Railway Vehicle Dynamics. Boca Raton: CRC Press. DOI: https://doi.org/10.1201/9781420004892 (in English)

Jaschinski, A., Chollet, H., Iwnicki, S. D., & Wickens, A. H. (1999). The Application of roller rigs to railway vehicle dynamics. Vehicle System Dynamics, 31(5-6), 345-392. DOI: https://doi.org/10.1076/vesd.31.5.345.8360 (in English)

Kumbhar, S. G., & Sudhagar, P. E. (2021). Fault Diagnostics of Roller Bearings Using Dimension Theory. ASME J Nondestructive Evaluation, 4(1), 1-10. DOI: https://doi.org/10.1115/1.4047102 (in English)

Luke, M. (2001). Eisenbahntechnische Rundschau, 4, 211-217. (in English)

Mallareddy, T. T., Blaschke, P., Schneider, S., & Alarcón, D. J. (2017). Brake Impedance Test Stand - Modal Testing of Brake Pads under Pressurized Condition Using 3D SLDV and a Scalable Automatic Modal Hammer. SAE Technical Paper 2017-01-2485, 1-2. DOI: https://doi.org/10.4271/2017-01-2485 (in English)

Miao, Y., Zhao, M., Lin, J., & Lei, Y. (2017). Application of an improved maximum correlated kurtosis deconvolution method for fault diagnosis of rolling element bearings. Mechanical Systems and Signal Processing, 92, 173-195. DOI: https://doi.org/10.1016/j.ymssp.2017.01.033 (in English)

Nalepa, K., Miąskowski, W., Wilamowska-Korsak, M., & Puchowski, P. (2017). Research stand with electrodynamic brake. Mechanik, 90(7), 559-561. DOI: https://doi.org/10.17814/mechanik.2017.7.72 (in English)

Suetti, A. G. L. (2019). Regressions of brake pads compressibility from experimental data. SAE Technical Paper 2019-36-0014, 1-5. DOI: https://doi.org/10.4271/2019-36-0014 (in English)

Tang, G., Li, G., & Wang, H. (2017). Sparse Component Analysis Based on Support Vector Machine for Fault Diagnosis of Roller Bearings. 2017 International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC) (pp. 415-420). Shanghai, China. DOI: https://doi.org/10.1109/SDPC.2017.85 (in English)

Xing, Y., Xu, H., Pei, S., Zhang, X., & Chang, W. (2016). Mechanical analysis of spherical roller bearings due to misalignments between inner and outer rings. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 231(17), 3250-3262. DOI: https://doi.org/10.1177/0954406216643108 (in English)

Xu, X., Zhao, M., Lin, J., & Lei, Y. (2016). Envelope harmonic-to-noise ratio for periodic impulses detection and its application to bearing diagnosis. Measurement, 91, 385-397. DOI: https://doi.org/10.1016/j.measurement.2016.05.073 (in English)