Parametric Optimization of Belt Conveyors by Energy Efficiency Criterion

Authors

DOI:

https://doi.org/10.15802/stp2021/242036

Keywords:

belt conveyor, energy efficiency; productivity; belt width; optimization, energy efficiency, productivity, belt width, optimization

Abstract

Purpose. The purpose of this work is to substantiate the optimal values of the belt conveyor parameters, at which the specific energy consumption for the cargo transportation takes on the lowest value. Methodology. The substantiation of the optimal values of the belt conveyor parameters was carried out by minimizing the function of specific energy consumption, which represents the energy consumption for the transportation of a cargo weighing 1 kg at a distance of 1 m. In the course of research, the drive force was determined using the contour bypass meth-od. In this case, the specific loads from the transported cargo, belt and roller supports were presented as functions of the belt width. To establish the optimal values of the conveyor productivity and belt speed, the belt width was presented as a function of these values, taking into account the physical and mechanical properties of the transported cargo, the design features of the roller supports and the belt angle. Findings. I obtained the dependences of specific energy consumption on the design parameters of the conveyor. Their analysis made it possible to identify the opti-mal values of the belt width, conveyor productivity, belt speed, and the optimal ratio of the last two values for dif-ferent types of transported cargo. It is noted that the results obtained can be supplemented by carrying out calcula-tions according to the formula given in this work. It has been established that the optimal value of the belt width depends only on the belt angle and on the coefficients that determine the energy losses, in particular the movement resistance coefficient of the belt; the influence of the specified coefficient increases with an increase in the belt angle. In addition, the optimal value of the belt width does not depend on the conveyor length, its productivity and belt speed. Originality. The dependences of the specific energy consumption on the design parameters of the belt conveyor were obtained, which made it possible to establish the optimal values of the belt width and the ratio of the conveyor productivity to the belt speed. Practical value. The results of this work can be used in the design of energy-efficient belt conveyors, which are characterized by the lowest specific energy consumption for cargo transportation.

References

Bohomaz, V. M., Borenko, M. V., Nechay, I. V., & Severyn, O. P. (2017). Qualitative analysis of dependence of drive power horizontal-inclined belt conveyor on its initial parameters. Science and Transport Progress, 1(67), 143-155. DOI: https://doi.org/10.15802/stp2017/94036 (in Ukrainian)

Bondariev, V. S., Dubynets, O. I., Kolisnyk, M. P., Bondariev, S. V., Horbatenko, Yu. P., & Barabanov, V. Ya. (2009). Pidjomno-transportni mashyny. Rozrakhunky pidijmaljnykh i transportuvaljnykh mashyn. Kyiv: Vyshha shkola. (in Ukrainian)

Korunyak, P., Baranovych, S., Kovalchuk, T., & Fornalchyk, Ye. (2014). Methods to improve designs conveyor belt. Journal of Lviv National Agrarian University: agronomy, 18, 74-78. (in Ukrainian)

Loveikin, V. S., Romasevych, Y. O., & Kulpin, R. A. (2019). Optimization of belt conveyor start by complex criteria. Machinery & Energetics, 10(2), 5-11. DOI: https://doi.org/10.31548/machenergy2019.02.005 (in Ukrainian)

Loveikin, V., Romasevych, O., Shalatovska, K., & Naumenko, P. (2017). Optimal control of conveyor belt movement in transient regimes. Gіrnichі, budіvelnі, dorozhnі ta melіorativnі mashini, 89, 16-23. (in Ukrainian)

Romakin, N. Ye. (2008). Mashiny nepreryvnogo transporta. Moscow: Akademiya. (in Russian)

Romasevych, Yu. O. (2018). Analiz perekhidnykh rezhymiv rukhu strichkovykh konveieriv. Hebezeuge und Fördermittel, 1(57), 66-75. (in Ukrainian)

Stadnik, M. I., & Vidmish, A. A. (2018). Study of starting of belt conveyors. Engineering, energy, transport AIC, 3(102), 98-104. (in Ukrainian)

Bohomaz, V. M. (2016). Research of dependence of belt conveyer drive power on its design parameters. Sci-ence and Transport Progress, 1(61), 131-146. DOI: https://doi.org/10.15802/stp2016/61024 (in English)

He, D., Liu, X., & Zhong, B. (2020). Sustainable belt conveyor operation by active speed control. Measurement, 154, 107458. DOI: https://doi.org/10.1016/j.measurement.2019.107458 (in English)

Gładysiewicz, L., Król, R., & Kisielewski, W. (2019). Measurements of loads on belt conveyor idlers operated in real conditions. Measurement, 134, 336-344. DOI: https://doi.org/10.1016/j.measurement.2018.10.068 (in English)

Li, J., & Pang, X. (2018). Belt conveyor dynamic characteristics and influential factors. Shock and Vibration, 2018, 1-13. DOI: https://doi.org/10.1155/2018/8106879 (in English)

Raksha, S. V., Kuropiatnyk, O. S., & Krasnoshchok, O. L. (2019). Justification of criteria for ropeways energy efficiency. Science and Transport Progress, 6(64), 60-71. DOI: https://doi.org/10.15802/stp2019/195601 (in English)

Published

2021-06-15

How to Cite

Kuropiatnyk, O. S. (2021). Parametric Optimization of Belt Conveyors by Energy Efficiency Criterion. Science and Transport Progress, (3(93), 50–58. https://doi.org/10.15802/stp2021/242036

Issue

Section

Mechanical Engineering