Advantages of an All-Welded Freight Car Bogie Side Frame
DOI:
https://doi.org/10.15802/stp2022/276541Keywords:
freight railway car, three-element bogie, side frame, all-welded structure, load spectrum, stress-strain state, mathematical modelling, fatigue tests, reliability, cyclic durability, survivabilityAbstract
Purpose. Railway safety during the operation of freight cars largely depends on the reliability, fatigue resistance and durability of the cast bearing elements of the three-element bogie, especially the side frames. Premature failure of cast frames occurs mainly due to undetected latent defects in the foundry. To eliminate these problems, it is advisable to develop an alternative native all-welded side frame for a bogie with an axle load of 23.5 tnf, which can be interchangeable with the cast structure. Methodology. Mathematical modelling approaches were used to determine the stress-strain state of an all-welded structure under the influence of regulated loads and to assess its strength in accordance with current national and modern world standards. Findings. Prototypes of the all-welded side frame structure were subjected to accelerated fatigue tests. The tests have experimentally proved that the cyclic durability of the developed side frame is significantly (2...4 times) higher than the cyclic durability of cast side frames. Originality. A comparative analysis of the permissible stress amplitudes in different zones of the all-welded side frame during long-term operation based on 107 load cycles in accordance with the current standard for the strength of railway cars and modern approaches to determining the fatigue resistance of welded joints showed the insufficient conservatism of the national standard for assessing the fatigue strength of welded joints, which was taken into account when developing a new design of the all-welded side frame. Practical value. In addition to increasing reliability, possible increase in overhaul mileage and warranty period of side frames by ensuring a high level of fatigue resistance and durability, the welded structure can ensure the accuracy of the base frame size, reduce the weight of unsprung masses, which should reduce wheel wear and improve the running characteristics of railway carriage bogies. Reducing the cost of introducing all-welded side frames into mass production compared to the use of foundry technology for the manufacture of these structures and the fact that the cost of manufacturing an all-welded side frame is generally competitive with a cast structure is also one of the important advantages of our developme
References
Bahrov, O. M. (2016). Bokovi ramy vizkiv vantazhnykh vahoniv. Ekspluatatsiia. Problemy ta yikh vyrishennia. Railway transport of Ukraine, 1-2, 29-34. (in Ukrainian)
Bahrov, O. M. (2016). The evaluation of manufacturing accuracy of cast bolster and side frame production for freight car bogies. Visnik of the Volodymyr Dahl East Ukrainian National University, 1(225), 17-21. (in Ukrainian)
Boronenko, Yu. P., & Orlova, A. M. (2004). Obobshchenie nakoplennogo opyta proektirovaniya telezhek gruzovykh vagonov dlya sozdaniya ikh tiporazmernogo ryada. Bulletin of the Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan, 5, 25-29. (in Russian)
Golubenko, A. L., Gubacheva, L. A., Andreev, A. A., & Mokrousov, S. D. (2013). Features the bogie frame freight wagons and fatigue strength. Visnik of the Volodymyr Dahl East Ukrainian National University, 9(1), 7-16. (in Russian)
DSTU 7598:2014 Vaghony vantazhni. Zaghaljni vymoghy do rozrakhunkiv ta proektuvannja novykh i moderni-zovanykh vaghoniv koliji 1520 mm (nesamokhidnykh). (2015). Kyev: Derzhstandart Ukrajiny (in Ukrainian)
Paton, B. Y., Lobanov, L. M., Pavlovskyi, V. I., Lashko, A. A. (2015). UA Patent № 95960 Ukrainskyi instytut intelektualnoi vlasnosti (Ukrpatent). (іn Ukrainian)
Lovsjka, A. O., Ravljuk, V. Gh., Viznjak, R. I., & Ghrebenjuk, V. A. (2016). Ekspluatacijni vlastyvosti transportnykh zasobiv: konspekt lekcij (Vol. 2). Kharkiv: UkrDUZT. (in Ukrainian)
Knysh, V. V., Mordiuk, B. M., Prokopenko, H. I., Solovei, S. O., Lynnyk, H. O., Volochai, V. V., & Popova, T. V. (2019). Podovzhennia terminu ekspluatatsii konstruktsii i sporud vysokochastotnoiu mekhanichnoiu prokovkoiu. In Proceeding of the International Scientific and Technical Conference «In-Service Damage of Materials, its Diagnostics and Prediction» (pp. 157-160). Ternopil, Ukraine. (in Ukrainian).
Mankevich, N. B. (2014). Dinamika gruzovykh vagonov na telezhkakh modeli 18-1711 s raznoy konstruktsiey klinev ressornogo podveshivaniya. Science Transport Progress, 1(49), 142-150. (in Ukrainian)
Mankevich, N. B. (2015). Improving the Design of Cast Parts for Two-Axle Bogies of Freight Cars (PhD dissertation). Dnepropetrovsk, Ukraine. (in Russian)
Makhnenko, V. I., Garf, E. F., Rimskiy, S. T., Galinich, V. I., Makhnenko, O. V., Yukhimets, P. S., …, & Varenchuk, P. A. (2006). Proekt svarnoy nadressornoy balki telezhek gruzovykh vagonov. Automatic Welding, 4, 3-10. (in Russian)
Radzikhovskiy, A. A. (2008). Sistemnyy podkhod k proektirovaniyu telezhek dlya gruzovykh vagonov s povyshennymi osevymi nagruzkami. Vagonnyy park, 8, 10-16. (in Russian)
Sotnikov, K. M., & Morozov, V. O. (2014). Tekhnichne obslughovuvannja ta remont vaghoniv: navchaljnyj posibnyk. Kharkiv: TO «Ekskljuzyv». (in Ukrainian)
STP 04-019:2018. Vaghony vantazhni. Remont vizkiv. Pravyla vykonannja. (2018). Kyiv: Akcionerne tovarystvo «Ukrajinsjka zaliznycja». (in Ukrainian)
DocRail. Retrieved from https://docrail.fr/les-trains-demarchandises-et-la-grande-vitesse-les-mv-160/2015-2022 (in French)
Hobbacher, A. F. (2016). Recommendations for Fatigue Design of Welded Joints and Components. In IIW Collection. Springer International Publishing. DOI: https://doi.org/10.1007/978-3-319-23757-2 (in English)
Lobanov, L. M., Makhnenko, O. V., Knysh, V. V., Solovej, S. A., & Pavlovskyi, V. I. (2020). Development of welded structure of side frame of freight car bogie of increased reliability. The Paton Welding Journal, 2020(3), 13-18. DOI: https://doi.org/10.37434/tpwj2020.03.02 (in English)
Makhnenko, O. V., Saprykina, G. Yu., Mirzov, I. V., & Pustovoj, A. D. (2014). Prospects for development of load-carrying elements of freight car bogie. The Paton Welding Journal, 2014(3), 33-38. DOI: https://doi.org/10.15407/tpwj2014.03.06 (in English)
Reidemeister, O. G., & Shykunov, O. A. (2018). Sensitivity of stresses to the forces acting on the cast parts of freight-car bogie. Science and Transport Progress, 4(76), 125-133. DOI: https://doi.org/10.15802/stp2018/141186 (in English)
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Science and Transport Progress
This work is licensed under a Creative Commons Attribution 4.0 International License.
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.