DETERMINATION OF BRAKING OPTIMAL MODE OF CONTROLLED CUT OF DESIGN GROUP

A. S. Dorosh

Abstract


Purpose. The application of automation systems of breaking up process on the gravity hump is the efficiency improvement of their operation, absolute provision of trains breaking up safety demands, as well as improvement of hump staff working conditions. One of the main tasks of the indicated systems is the assurance of cuts reliable separation at all elements of their rolling route to the classification track. This task is a sophisticated optimization problem and has not received a final decision. Therefore, the task of determining the cuts braking mode is quite relevant. The purpose of this research is to find the optimal braking mode of control cut of design group. Methodology. In order to achieve the purpose is offered to use the direct search methods in the work, namely the Box complex method. This method does not require smoothness of the objective function, takes into account its limitations and does not require calculation of the function derivatives, and uses only its value. Findings. Using the Box method was developed iterative procedure for determining the control cut optimal braking mode of design group. The procedure maximizes the smallest controlled time interval in the group. To evaluate the effectiveness of designed procedure the series of simulation experiments of determining the control cut braking mode of design group was performed. The results confirmed the efficiency of the developed optimization procedure. Originality. The author formalized the task of optimizing control cut braking mode of design group, taking into account the cuts separation of design group at all elements (switches, retarders) during cuts rolling to the classification track. The problem of determining the optimal control cut braking mode of design group was solved. The developed braking mode ensures cuts reliable separation of the group not only at the switches but at the retarders of brake position. Practical value. The developed procedure can be successfully used to determine the optimal braking modes of cuts in automation systems of trains breaking up on the gravity humps.


Keywords


marshalling yard; gravity hump; braking mode; cut; Box method

Full Text:

PDF

References


Bobrovskyi V.I., Dorosh A.S. Doslidzhennia vplyvu parametriv keruvannia upovilniuvachamy na tochnist halmuvannia vidchepiv [The impact study of control parameters by retarders on the accuracy of cut braking]. Zbirnyk naukovykh prats Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana «Transportni systemy ta tekhnolohii perevezen» [Proc. of Dnipropetrovsk National University of Railway Transport Named after Academician V. Lazaryan «Transport Systems and Transport Technologies»], 2013, issue 6, pp. 10-14.

Bobrovskyi V.I. Mnogoshagovyy dvukhetapnyy metod optimizatsii rezhimov rospuska sostavov na gorkakh [Multistage two-stage method of modes optimization of rolling stock dissolution on the humps]. Informatsionno-upravlyayushchiye sistemy na zheleznodorozhnom transporte Information Management Systems on Railway Transport, 2004, no. 2, pp. 8-14.

Bobrovskyi V.I., Kudryashov A.V. Optimizatsiya rezhimov rasformirovaniya sostavov na sortirovochnykh gorkakh [Optimization of modes of dissolution of the compositions on humps]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2010, issue 32, pp. 224-229.

Bobrovskyi V.I., Rogov N.V. Optimizatsiya rezhimov regulirovaniya skorosti ottsepov pri rospuske sostavov na gorkakh [Regulating methods optimization of the cuts speed at dissolution of the rolling stock on sorting humps]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2004, issue 4, pp. 174-182.

Bobrovskyi V.I. Optimizatsiya rezhimov tormozheniya ottsepov na sortirovochnykh gorkakh [Optimization of the cuts braking modes on sorting humps]. Transport: Zbirnyk naukovykh prats Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Transport: Proc. of Dnipropetrovsk National University of Railway Transport Named after Academician V. Lazaryan], 2000, pp. 43-47.

Bobrovskyi V.I., Dorosh A.S. Optimizatsiya rezhimov tormozheniya ottsepov raschetnoy gruppy sostava [The optimization of retarding regimes within the particular group of cuts]. Nauka ta prohres transportu. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu – Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, 2013, no. 1 (43), pp. 103-112. doi: 10.15802/stp2013/9582.

Bobrovskyi V.I. Poisk optimalnykh rezhimov tormozheniya na proyektiruyemykh sortirovochnykh gorkakh [The search for optimal braking modes on projected sorting humps]. Informatsionno-upravlyayushchiye sistemy na zheleznodorozhnom transporte – Information and Control Systems on Railway Transport, 1999, no. 5, pp. 50-54.

Kozachenko D.M. Efektyvni rezhymy halmuvannia vidchepiv na sortuvalnykh hirkakh [Effective braking modes of cuts on sorting humps]. Zbirnyk naukovykh prats Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana «Transportni systemy ta tekhnolohii perevezen» [Proc. of Dnipropetrovsk National University of Railway Transport Named after Academician V. Lazaryan «Transport Systems and Transport Technologies], 2011, issue 2, pp. 55-59.

Kozachenko D.N. Issledovaniye usloviy intervalnogo regulirovaniya skorosti skatyvaniya ottsepov na avtomatizirovannykh gorkakh [Studies of the conditions of the interval speed control rolling unhook on automated slides]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2010, issue 34, pp. 46-50.

Kozachenko D.N. Kriteriy optimizatsii rezhimov tormozheniya ottsepov raschetnoy gruppy v usloviyakh deystviya sluchaynykh faktorov [The optimization criterion of cuts braking modes of accounting group in the action conditions of random factors]. Zbirnyk naukovykh prats Donetskoho instytutu zaliznychnoho transportu ukrainskoi derzhavnoi akademii zaliznychnoho transportu [Proc. of Donetsk Railway Transport Institute of Ukrainian State Academy of Railway Transport],Donetsk, 2010, issue 23, pp. 14-21.

Kozachenko D.M., Berezovyi M.I., Taranets O.I. Modeliuvannia roboty sortuvalnoi hirky v umovakh nevyznachenosti parametriv vidchepiv ta kharakterystyk navkolyshnoho seredovyshcha [Work modeling of a hump in the uncertainty conditions of the cut parameters and environment characteristics]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2007, issue 16, pp. 73-76.

Bobrovskyi V.I., Kozachenko D.N., Bozhko N.P. Optimizatsiya rezhimov tormozheniya ottsepov na sortirovochnykh gorkakh [Optimisation of cut braking modes on sorting humps]. Dnipropetrovsk, Makovetskiy Publ., 2010. 260 p.

Preparata F., Sheymos M. Vychislitelnaya geometriya: Vvedeniye [Computational geometry: Introduction]. Moscow, Mir Publ., 1989. 478 p.

Rekleytis G., Reyvindran A., Regsdel K. Optimizatsiya v tekhnike [Optimization in techniques]. Moscow, Mir Publ., 1986. Book 1. 349 p.

Box M.J. A new method of constrained optimization and a comparison with other methods. The Computer Journal, 1965, vol. 8, issue 1, pp. 42-52. doi: 10.1093/comjnl/8.1.42.

Ning H., Xinghan L. Discussion on Hump Rolling Vehicle Speed Control Problem. Retarders & Speed Control Technology, 2011, issue 3, pp. 9-16.

Shengjun F. Research on Application of Braking Retarder Speed Control System. Retarders & Speed Control Technology, 2012, issue 4, pp. 11-16.

Tian-ming M., Lian-xiang Z. The Research of Hump Retarder Assistant Speed Control System. Retarders & Speed Control Technology, 2011, issue 1, pp. 1-7.

Zářecký S., Grúň J., Žilka J. The newest trends in marshalling yards automation. Transport problems, 2008, tom 3, vol. 4, part 1, pp. 87-95.


GOST Style Citations


  1. Бобровський, В. І. Дослідження впливу параметрів керування уповільнювачами на точність гальмування відчепів / В. І. Бобровський, А. С. Дорош // Зб. наук. пр. Дніпропетр. нац. ун-ту залізн. трансп. ім. акад. В. Лазаряна «Трансп. системи та технології перевезень». – Дніпропетровськ, 2013. – Вип. 6. – С. 10–14.
  2. Бобровский, В. И. Многошаговый двухэтапный метод оптимизации режимов роспуска сос-тавов на горках / В. И. Бобровский // Информ.-управляющие системы на ж.-д. трансп. – 2004. – № 2. – С. 8–14.
  3. Бобровский, В. И. Оптимизация режимов расформирования составов на сортировочных горках / В. И. Бобровский, А. В. Кудряшов // Вісн. Дніпропетр. нац. ун-ту залізн. трансп. ім. акад. В. Лазаряна. – Дніпропетровськ, 2010. – Вип. 32. – С. 224–229.
  4. Бобровский, В. И. Оптимизация режимов регулирования скорости отцепов при роспуске составов на горках / В. И. Бобровский, Н. В. Рогов // Вісн. Дніпропетр. нац. ун-ту залізн. трансп. ім. акад. В. Лазаряна. – Дніпропетровськ, 2004. – Вип. 4. – С. 174–182.
  5. Бобровский, В. И. Оптимизация режимов торможения отцепов на сортировочных горках / В. И. Бобровский // Транспорт : зб. наук. пр. / Дніпропетр. держ. техн. ун-т залізн. трансп. – Дніпропетровськ, 2000. – С. 43–47.
  6. Бобровский, В. И. Оптимизация режимов торможения отцепов расчетной группы состава / В. И. Бобровский, А. С. Дорош // Наука та прогрес трансп. Вісн. Дніпропетр. нац. ун-ту залізн. трансп. – 2013. – № 1 (43). – С. 103–112. doi: 10.15802/stp2013/9582.
  7. Бобровский, В. И. Поиск оптимальных режимов торможения на проектируемых сортировочных горках / В. И. Бобровский // Информ.-управл. системы на ж–д. транспорте. – 1999. – № 5. – С. 50–54.
  8. Козаченко, Д. М. Ефективні режими гальмування відчепів на сортувальних гірках / Д. М. Козаченко // Зб. наук. пр. Дніпропетр. нац. ун-ту залізн. трансп. ім. акад. В. Лазаряна «Трансп. системи та технології перевезень». – Дніпропетровськ, 2011. – Вип. 2. – С. 55−59.
  9. Козаченко, Д. Н. Исследование условий интервального регулирования скорости скатывания отцепов на автоматизированных горках / Д. Н. Козаченко // Вісн. Дніпропетр. нац. ун-ту залізн. трансп. ім. акад. В. Лазаряна. – Дніпропетровськ, 2010. – Вип. 34. – С. 46−50.
  10. Козаченко, Д. Н. Критерий оптимизации режимов торможения отцепов расчетной группы в условиях действия случайных факторов / Д. Н. Козаченко // Зб. наук. пр. Донецького ін-ту залізн. трансп. Укр. держ. акад. залізн. трансп. – Донецьк, 2010. – Вип. 23. – С. 14−21.
  11. Козаченко, Д. М. Моделювання роботи сортувальної гірки в умовах невизначеності параметрів вiдчепiв та характеристик навколишнього середовища / Д. М. Козаченко, М. I. Березовий, О. I. Таранець // Вісн. Дніпропетр. нац. ун-ту залізн. трансп. ім. акад. В. Лазаряна. – Дніпропетровськ, 2007. – Вип. 16. – С. 73−76.
  12. Оптимизация режимов торможения отцепов на сортировочных горках : монография / В. И. Бобровский, Д. Н. Козаченко, Н. П. Божко [и др.]. – Днепропетровск : Маковецкий, 2010. – 260 с.
  13. Препарата, Ф. Вычислительная геометрия: Введение : монография / Ф. Препарата, М. Шеймос. – Москва : Мир, 1989. – 478 с.
  14. Реклейтис, Г. Оптимизация в технике : В двух кн. Кн. 1. / Г. Реклейтис, А. Рейвиндран, К. Рэгсдел. – Москва : Мир, 1986. – 349 с.
  15. Box, M. J. A new method of constrained optimization and a comparison with other methods / M. J. Box // The Computer J. – 1965. – Vol. 8. – Iss. 1. – P. 42–52. doi: 10.1093/comjnl/8.1.42.
  16. Ning, H. Discussion on Hump Rolling Vehicle Speed Control Problem / H. Ning, L. Xinghan // Retarders & Speed Control Technology. – 2011. – Iss. 3. – P. 9–16.
  17. Shengjun, F. Research on Application of Braking Retarder Speed Control System / F. Shengjun // Retarders & Speed Control Technology. – 2012. – Iss. 4. – P. 11–16.
  18. Tian-ming, M. The Research of Hump Retarder Assistant Speed Control System / M. Tian-ming, Z. Lian-xiang // Retarders & Speed Control Technology. – 2011. – Iss. 1. – P. 1–7.
  19. Zářecký, S. The newest trends in marshalling yards automation / S. Zářecký, J. Grúň, J. Žilka // Transport problems. – 2008. – Т. 3. – Vol. 4. – Part 1. – P. 87–95.


DOI: https://doi.org/10.15802/stp2015/46044

 

Cited-by:

1. COMPLEX SIMULATION MODEL OF TRAIN BREAKING-UP PROCESS AT THE HUMPS
E. B. Demchenko
Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport  Issue: 6(60)  First page: 25  Year: 2015  
doi: 10.15802/stp2015/57003

2. REDUCTION IN CUTS SPEED AT THE BEGINNING OF A SORTING SIDINGS, EQUIPPED WITH QUASI-CONTINUOUS SPEED CONTROL SYSTEM
O. A. Nazarov
Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport  Issue: 4(64)  First page: 47  Year: 2016  
doi: 10.15802/stp2016/77881



Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

 

ISSN 2307–3489 (Print)
ІSSN 2307–6666 (Online)