INFORMATION-MEASURING TEST SYSTEM OF DIESEL LOCOMOTIVE HYDRAULIC TRANSMISSIONS

Authors

DOI:

https://doi.org/10.15802/stp2015/53159

Keywords:

hydraulic transmission, hydraulic testing, test stand, sensors, information-measuring system

Abstract

Purpose. The article describes the process of developing the information-measuring test system of diesel locomotives hydraulic transmission, which gives the possibility to obtain baseline data to conduct further studies for the determination of the technical condition of diesel locomotives hydraulic transmission. The improvement of factory technology of post-repair tests of hydraulic transmissions by automating the existing hydraulic transmission test stands according to the specifications of the diesel locomotive repair enterprises was analyzed. It is achieved based on a detailed review of existing foreign information-measuring test systems for hydraulic transmission of diesel locomotives, BelAZ earthmover, aircraft tug, slag car, truck, BelAZ wheel dozer, some brands of tractors, etc. The problem for creation the information-measuring test systems for diesel locomotive hydraulic transmission is being solved, starting in the first place from the possibility of automation of the existing test stand of diesel locomotives hydraulic transmission at Dnipropetrovsk Diesel Locomotive Repair Plant "Promteplovoz". Methodology. In the work the researchers proposed the method to create a microprocessor automated system of diesel locomotives hydraulic transmission stand testing in the locomotive plant conditions. It acts by justifying the selection of the necessary sensors, as well as the application of the necessary hardware and software for information-measuring systems. Findings. Based on the conducted analysis there was grounded the necessity of improvement the plant hydraulic transmission stand testing by creating a microprocessor testing system, supported by the experience of developing such systems abroad. Further research should be aimed to improve the accuracy and frequency of data collection by adopting the more modern and reliable sensors in tandem with the use of filtering software for electromagnetic and other interference. Originality. The authors developed the information-measuring system that improves the hydraulic transmission test process by automating and increasing the accuracy of measurements of control parameters. The measurement results are initial data for carrying out further studies to determine the technical condition of the hydraulic transmission UGP750-1200 during the plant post-repair tests. Practical value. The paper proposed the alternate design of microprocessor hydraulic transmission test system for diesel locomotives, which has no analogues in Ukraine. Automated data collection during the tests will allow capturing the fast processes to determine the technical condition of hydraulic transmission.

Author Biographies

I. V. Zhukovytskyy, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

Dep. «Electronic Computing Machines», Lazaryan St., 2, Dnipropetrovsk, Ukraine, 49010, tel. +38 (056) 373 15 89

I. A. Kliushnyk, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

Dep. «Electronic Computing Machines», Lazaryan St., 2, Dnipropetrovsk, Ukraine, 49010, tel. +38 (056) 373 15 89

O. B. Ochkasov, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

Dep.«Locomotives », Lazaryan St., 2, Dnipropetrovsk, Ukraine, 49010, tel. +38 (056) 733 19 61

R. O. Korenyuk, Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan

Dep.«Locomotives », Lazaryan St., 2, Dnipropetrovsk, Ukraine, 49010, tel. +38 (056) 733 19 61

References

Bodnar B.Ye., Ochkasov O.B., Koreniuk R.O. Pidvyshchennia enerhoefektyvnosti vyprobuvannia hidravlichnykh peredach teplovoziv [Energy efficiency testing of hydraulic transmission of diesel locomotives]. Tezy Vseukrainskoi naukovo-tekhnichnoi konferentsii molodykh vchenykh, mahistrantiv ta studentiv «Naukovo-tekhnichnyi prohres na transporti» [Thesis of Ukrainian Sci. and Technical Сonf. of young scientists, undergraduates and students «Scientific and Technical Progress in Transport»], 2015, pp . 60-61.

Bodnar B.Ye. Teoreticheskiye osnovy, opyt sozdaniya sistem ispytaniya i diagnostirovaniya teplovozov s gidrodinamicheskoy peredachey. Dokt. Diss. [Theoretical foundations, experience of systems testing and diagnostics of diesel locomotives with hydrodynamic transmission. Doct. Diss.]. Dnipropetrovsk, 1996. 375 p.

Bodnar Ye.B. Osnovni vymohy ta pryntsypy stvorennia bortovykh system diahnostuvannia lokomotyviv [Basic requirements and principles of creation onboard diagnostic systems of locomotives]. Nauka ta prohres transportu. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu – Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, 2014, no. 1 (49), pp. 68-74. doi: 10.15802/stp2014/22664.

Datchiki davleniya MIDA-13P. Rukovodstvo po ekspluatatsii [Pressure transmitters MIDA-13P. Manual]. Ulyanovsk, Mikroelektronnyye datchiki i ustroystva Publ., 2011. 74 p.

Kapitsa M.I., Minchuk V.P., Korenyuk R.A. Opredeleniye velichiny teplovykh poter pri ispytanii teplovoznoy gidrodinamicheskoy peredachi v rezhime «vybega» [Determination of the heat losses when testing diesel hydrodynamic transmission in the «coasting»]. Visnyk Skhidnoukrainskoho natsionalnoho universytetu imeni V. Dalia [Bulletin of East Ukrainian national University named after V. Dahl], 2013, issue 18, pp. 13-16.

Kompyuterizirovannyy stend dlya ispytaniy i obkatki gidromekhanicheskikh peredach (GMP) avtomobiley BelAZ [Computerized test bench and running the hydromechanical transmission (GMT) of BelAZ cars]. OOO NTTs «Tekhnicheskaya diagnostika i pretsizionnyye izmereniya» [LLC STC «Technical diagnostics and precision measurements»], 2014. Available at: http://www.diag-meas.ru/stendgmp.html (Accessed 6 July 2015).

Lyashuk V.M. Informatsionno–diagnosticheskaya sistema ispytaniy teplovozov s gidrodinamicheskoy peredachey na baze mikro-EVM [Information and diagnostic system tests of locomotives with hydrodynamic transmission based on a micro-computer]. EVM: mezhvuzovskiy sbornik nauchnykh trudov [Computer: interuniversity Proc.]. Dnipropetrovsk, 1987, pp. 44-52.

Ochkasov O.B., Korenyuk R.O., Parfonov O.S. Udoskonalennia vyprobuvannia hidravlichnykh peredach teplovoziv [Improving of testing the hydraulic transmission of diesel locomotives]. Tezy Vseukrainskoi naukovo-tekhnichnoi konferentsii molodykh vchenykh, mahistrantiv ta studentiv «Naukovo-tekhnichnyi prohres na transporti» [Thesis of Ukrainian Sci. and Technical Сonf. of young scientists, undergraduates and students «Sci. and Technical Progress in Transport»], 2014, pp. 74-75.

Zopf W.D. Automated diagnostics for crawler transmission hydraulic circuits. Patent no. 890604.

Programmiruyemyy indikator tekhnologicheskikh parametrov – indikator davleniya MikRA I4. Rukovodstvo po ekspluatatsii [Programmable indicator for process parameters – pressure indicator Micra I4. Manual]. Kyiv, MikRa Publ., 2010. 15 p.

Programmiruyemyy indikator tekhnologicheskikh parametrov MikRA I3. Rukovodstvo po ekspluatatsii [Programmable indicator of technological parameters Micra I3. Manual]. Kyiv, MikRa Publ., 2010. 16 p.

Yakovlev G.F. Remont gidravlicheskikh peredach teplovozov [Repair of hydraulic transmission of diesel locomotives].Moscow, Transport Publ., 1975. 264 p.

Khmarskyi Yu.I., Ochkasov O.B., Koreniuk R.O., Kliushnyk I.A. Rozrobka informatsiino-vymiriuvalnoi systemy vyprobuvannia hidravlichnykh peredach teplovoziv [The development of information and measuring systems of testing hydraulic transmission of diesel locomotives]. Tezisy 75 Mezhdunarodnoy nauchno-prakticheskoy konferentsii. «Problemy i perspektivy razvitiya zheleznodorozhnogo transportu (14.05–15.05.2015 )» [Thesis of 75 Int. Sci. and Practical Conf. «Problems and prospects of development of railway transport (14.05–15.05.2015 )»], 2015, pp. 13-14.

Stend dlya ispytaniy i obkatki gidroperedachi [Stand for testing and running of hydraulic transmission]. OOO NTTs «Tekhnicheskaya diagnostika i pretsizionnyye izmereniya» [LLC STC «Technical diagnostics and precision measurements»], 2014. Available at: http://www.diag-meas.ru/stendgt.html (Accessed 6 July 2015).

Stend dlya provedeniya ispytaniy unifitsirovannoy gidroperedachi UGP 230 [Stand for testing of unified hydraulic transmission UGP 230]. Zavod spetsializirovannogo oborudovaniya «Standart» [The plant of specialized equipment «Standard»], 2014 Available at: http://inovcom.ru/catalog/stendy/stend-dlya-ispytaniya-unifitsirovannoy-gidroperedachi-ugp-230 (Accessed 6 July 2015).

Bodnar B.Ye., Minchuk V.P., Ochkasov O.B., Koreniuk R.O. Udoskonalennia stendu vyprobuvannia hidravlichnykh peredach teplovoziv [Improvement of test bench hydraulic transmission of diesel locomotives]. Tezy 75 Mizhnarodnoi naukovo-praktychnoi konferentsii «Problemy ta prespektyvy rozvytku zaliznychnoho transportu» [Thesis of 75 Int. Sci.-Practical Conf. «Problems and Prospects of Railway Transport Development»], 2015, pp. 23-24.

Isermann R. Engine Modeling and Control: Modeling and Electronic Management of Internal Combustion Engines. Berlin, Springer-Verlag Publ., 2014. 637 p. doi 10.1007/978-3-642-39934-3.

Kuang J., Wang G., Bian J. A Modbus Protocol Stack Compatible with RTU/TCP Frames and Embedded Application. Business, Economics, Financial Sciences, and Management Advances in Intelligent and Soft Computing, 2012, vol. 143, pp. 765-770. doi: 10.1007/978-3-642-27966-9_102.

Published

2015-11-10

How to Cite

Zhukovytskyy, I. V., Kliushnyk, I. A., Ochkasov, O. B., & Korenyuk, R. O. (2015). INFORMATION-MEASURING TEST SYSTEM OF DIESEL LOCOMOTIVE HYDRAULIC TRANSMISSIONS. Science and Transport Progress, (5(59), 53–65. https://doi.org/10.15802/stp2015/53159

Issue

Section

OPERATION AND REPAIR OF TRANSPORT MEANS