ABOUT WAVEFORM OF BRAKING CYLINDER FILLING IN FREIGHT CARS
DOI:
https://doi.org/10.15802/stp2016/67346Keywords:
mathematical modeling, transient modes, train motion, pneumatic braking, longitudinal forces, braking distancesAbstract
Purpose. As part of the scientific paper it is necessary to study the waveform impact of the braking cylinders filling on longitudinal train dynamics at different modes of braking. At this one should estimate the level of maximum longitudinal forces and braking distance size in freight cars of various lengths. Methodology. In this paper we attempt to approximate the actual diagram of braking cylinders filling with rational functions of varying degrees. In selection of coefficients in the required functions the highest values of the longitudinal forces and braking distances were used as controlled parameters. They were compared with similar values obtained as a result of experimental rides. The level of longitudinal forces and braking distances amount were evaluated by means of mathematical modeling of train longitudinal vibrations, caused by different braking modes. Findings. At mathematical modeling was assumed that the train consists of 60 uniform four-axle gondola cars, weight of 80 tons, equipped with air dispenser No. 483 included in the median operation, composite braking blocks, and one locomotive VL-8. Train before braking has been pre-stretched. Various types of pneumatic braking (emergency, full service and adjusting braking) of the freight train on the horizontal section of the track were simulated. As the calculation results were obtained values of the longitudinal forces, braking distances amounts and reduction time in speed at various braking modes. Originality. Waveform impact of the braking cylinders filling on the longitudinal forces level and braking distances amount in freight trains were investigated. Also the longitudinal loading of freight trains at various pneumatic braking was investigated. Practical value. Obtained results can be used to assess the level of largest longitudinal forces and braking distances in the freight trains of different lengths by mathematical modeling of different braking modes.
References
Anisimov V.V. Raschet dliny tormoznogo puti s ispolzovaniyem approksimiruyushchikh polinomov [Length calculation of the braking distance using the approximating polynomials]. Innovatsionnyye tekhnologii v avtomatike, informatike i telekommunikatsiyakh [Innovative technologies in automation, informatics and telecommunications]. Khabarovsk, 2013. pp. 13-17.
Blokhin Ye.P., Zheleznov K.I., Ursuliak L.V. Vychislitelnyy kompleks dlya resheniya zadach bezopasnosti i ustoychivosti dvizheniya podvizhnogo sostava zheleznykh dorog [Computing system for solving problems of security and stability of railway rolling stock]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2007, issue18, pp. 106-114.
Blokhin Ye.P., Manashkin L.A. Dinamika poyezda [Train dynamics]. Moscow, Transport Publ., 1982. 222 p.
Blokhin Ye.P. Prodolnyye nagruzki pri perekhodnykh rezhimakh dvizheniya poyezda [Longitudinal loads at transient modes of the train motion]. Zaliznychnyi transport Ukrainy – Railway Transport of Ukraine, 2000, no. 3, pp. 8-11.
Grebenyuk P.T. Dinamika tormozheniya gruzovykh poyezdov [Brake dinamycs of freight cars]. Vestnik VNIIZhTa – Bulletin of ARSRIRT, 2002, no. 1, pp. 23-27.
Nikiforov B.D., Golovkin V.I., Kutyev Yu.G. Avtomatizatsiya upravleniya tormozheniyem poyezdov [Control automation of train braking]. Moscow, Transport Publ., 1985. 263 p.
Blokhin Ye.P., Ursulyak L.V., Zheleznov K.I., Romanyuk Ya.N. O vozhdenii dlinnosostavnykh poyezdov [About driving of long compound trains]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan], 2009, issue 30, pp. 48-55.
Blokhin Ye.P., Manashkin L.A., Stambler Ye.L. Raschety i ispytaniya tyazhelovesnykh poyezdov [Calculations and tests of heavy trains]. Moscow, Transport Publ., 1986. 264 p.
Horobets V.L., Masleieva L.H., Ursuliak L.V., Arsonov V.V. About the evaluation of the longitudinal forces level effecting the track displacement at transient modes of train movement. Nauka ta prohres transportu – Science and Transport Progress, 2015, no. 2 (56), pp. 207-221. doi: 10.15802/stp2015/42179.
Andersson E., Berg M., Stichel S. Rail Vehicle Dynamics. Stockholm, Royal Institute of Technology Publ., 2005. 168 p.
E. Meli, G. Pallini, A. Rindi, F. Capanni, S. Rossin. Effect of Structural Dynamics on the Shaft Line Rotor Response in Turbomachines. Vibration Engineering and Technology of Machinery. Series: Mechanisms and Machine Science, 2015, vol. 23, pp. 987-997. doi: 10.1007/978-3-319-09918-7_87.
Lingaitis L.P., Dailydka S., Jevdomacha G. Research on selection of modes of driving heavy trains on main IXB and IXD corridors of JSC «Lietuvos geležinkeliai». Transport problems. Problemy transportu, 2012, vol. 7, issue 4, pp. 39-47.
Lingaitis L.P., Vaičiūnas G., Liudvinavičius L., Jevdomacha G. Methods of calculation line optimum travel of trains with consideration of longitudinal dynamic efforts. Transport problems. Problemy transportu, 2013, vol. 8, issue 2, pp. 25-34.
Muller L., Witt T. Train–a Computer Model for the Simulation of Longitudinal Dynamics in Trains. Conference on Railway Engineering. Rockhampton, Institution of Engineers Publ., 1998, pp. 181-186.
Downloads
Published
How to Cite
Issue
Section
License
Copyright and Licensing
This journal provides open access to all of its content.
As such, copyright for articles published in this journal is retained by the authors, under the terms of the Creative Commons Attribution 4.0 International License (CC BY 4.0). The CC BY license permits commercial and non-commercial reuse. Such access is associated with increased readership and increased citation of an author's work. For more information on this approach, see the Public Knowledge Project, the Directory of Open Access Journals, or the Budapest Open Access Initiative.
The CC BY 4.0 license allows users to copy, distribute and adapt the work in any way, provided that they properly point to the author. Therefore, the editorial board of the journal does not prevent from placing published materials in third-party repositories. In order to protect manuscripts from misappropriation by unscrupulous authors, reference should be made to the original version of the work.
