RELATIONSHIP BETWEEN ROLLING AND SLIP RESISTANCE IN ROLLING BEARINGS

L. M. Bondarenko, M. O. Babyak, S. O. Yakovlev, S. O. Istin, G. Yu. Moskalev

Abstract

Purpose. About one of the causes of slip rolling is known from the second half of the 19th century, it was believed that the slip resistance appears at the place of contact due to different speeds on the arc of contact. Only in the mid-20th century it was proved that this resistance is negligible in rolling resistance. However (for some unknown reason) it is ignored the fact that in practice in rolling bearings may rotate both the inner ring with a stationary outer one, and vice versa almost in equal relations. It is not taken into account the fact that the ball or roller in the rolling bearings runs the different distance along the roller path of the outer and inner bearing cages in one revolution. This fact is not taken into account in determining the calculated values for the friction coefficient of a rolling bearing reduced to the shaft. Therefore, the aim of this work is to determine the influence of path length on the track riding the outer and inner race of the bearing on the determination of the calculated value of the coefficient of friction of rolling bearings is given to the shaft. Methodology. The solution technique is based on the theory of plane motion of a rigid body, the theory of Hertzian contact deformation and the analytical dependencies for determination of coefficient of rolling friction. Findings. The obtained dependences on determination of rolling resistance of the balls or rollers along the bearing tracks of inner and outer bearing cages as well as path difference metering of the rolling on them allows to analytically obtain the rolling resistance and slipping for any size of bearings and different devices of bearing units. It is also possible at the design stage of rolling nodes to handle not only the design but also the content of the node. Originality. Using the analytical dependences for determination of the rolling resistance of bodies at point and line contacts, and also account for the difference in the path of the rolling ball or roller on the outer and inner cages of the bearing one can more accurately find the rolling resistance in the bearings. Practical value. The obtained dependences allow designing the bearing units with minimal energy consumption.

Keywords

bearing; slip; rolling; contact; voltage; resistance

Full Text:

PDF TRANSLATION (Русский)

References

Astakhov V.N., Lysikov Ye.N., Konovalov P.Ye. Otsenka rezhimov treniya i smazki v podshipnikakh osevogo podveshivaniya lokomotivov [Estimation of modes friction and greasing in bearing axial hanging of locomotives]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk national University of railway transport named after Academician V. Lazaryan], 2012, issue 40, pp. 55-61.

Bondarenko L.M., Dovbnia M.P., Loveikin V.S. Deformatsiini opory v mashynakh [Deformation supports in cars]. Dnipropetrovsk, Dnipro-VAL Publ., 2003. 200 p.

Bondarenko L.N., Matviets T.V., Bondarenko V.D. Sootnosheniya mezhdu rabotami sil treniya kacheniya i skolzheniya v paradokse Gerona [Relations between operation of friction forces of rolling and sliding in the paradox of Heron]. Materiály VI mezinárodní vědecko-praktická konference «Efektivní nástroje moderních věd–2011». Praha, 2011, pp. 27-29.

Volkov N.N., Rodzevich N.V. Podshipniki kacheniya kolesnykh par vagonov i lokomotivov. Issledovaniye, raschet i konstruirovaniye [Rolling bearings of the wheel sets of cars and locomotives. The study, calculation and design]. Moscow, Mashinostroeniye Publ., 1972. 167 p.

Gura G.S. Kacheniye tel s treniyem. Fretting [Rolling bodies with friction. Fretting]. Sochi, Doriya Publ., 2009. 295 p.

Dzhonson K. Mekhanika kontaktnogo vzaimodeystviya [Contact interaction mechanics]. Moscow, Mir Publ., 1989. 510 p.

Diachenko P.V. Modeliuvannia vplyvu pidshypnykiv kochennia na dempfuvannia kolyvan u zacheplenni zubchastykh kolis [Modeling influence of rolling bearings bush and vibrations damping in catching of toothed wheels]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk national University of railway transport named after Academician V. Lazaryan], 2011, issue 36, pp. 16-24.

Ivanov M.N. Detali mashin [Machine components]. Moscow, Vysshaya shkola Publ.,1975. 551 p.

Karpenko V.A. Vzaimozamenyayemost, standartizatsiya i tekhnicheskiye izmereniya [Interchangeability, standardization and technical measurements]. Sevastopol, Izdatelstvo SevNTU Publ., 2007. 372 p.

Kozhevnikov S.N. Teoriya mekhanizmov i mashin [Theory of mechanisms and machines]. Moscow, Mashinostroyeniye Publ, 1969. 584 p.

Pisarenko G.S., Yakovlev A.P., Matveyev V.V. Spravochnik po soprotivleniyu materialov [Handbook of materials resistance]. Kyiv, Naukova Dumka Publ., 1988. 736 p.

Aleksandrov M.P., Gokhberg M.M., Kovin A.A., Kulkova N.N., Mazover I.S., Nevzorov L.A., Orlov A.N., Plavnik B.I., Samoylovich P.A., Serlin L.G., Sokolov S.A. Spravochnik po kranam. T. 2 [Guide on cranes. Vol. 2]. Leningrad, Mashinostroyeniye Publ., 1988. 559 p.

Bondarenko L.M., Yakovliev S.O., Kramar I.E., Shaptala O.I. Umovy kochennia bez prokovzuvannia til pry riznykh skhemakh dotyku [Conditions of rolling without slipping of bodies at various contact schemes]. Sheffield, Science and education LTD Publ., 2014. P. 12-17.

Pletz M., Daves W., Yao W., Kubin W., Scheriau S. Multi-scale finite element modeling to describe rolling contact fatigue in a wheel–rail test rig. Tribology International, 2014, vol. 80, pp. 147-155. doi: 10.1016/j.triboint.2014.07.005.

Reynolds O. On rolling friction. Proc. of the Royal Society of London, 1874, vol. 23, issue 156-163, pp. 506-509. doi: 10.1098/rspl.1874.0080.

Tabor D. The mechanism of Rolling Friction. II. The Elastic Range. Proc. of the Royal Society A: Mathematical, Physical and Engineering Sciences, 1955, vol. 229, issue 1177, pp. 198-220. doi: 10.1098/rspa.1955.0082.

GOST Style Citations

1. Астахов, В. Н. Оценка режимов трения и смазки в подшипниках осевого подвешивания локомотивов / В. Н. Астахов, Е. Н. Лысиков, П. Е. Коновалов // Вісн. Дніпропетр. нац. ун-ту залізн. трансп. ім. акад. В. Лазаряна. – Дніпропетровськ, 2012. – Вип. 40. – С. 55–61.
2. Бондаренко, Л. М. Деформаційні опори в машинах / Л. М. Бондаренко, М. П. Довбня, В. С. Ловейкін. – Дніпропетровськ : Дніпро-VAL, 2003. – 200 с.
3. Бондаренко, Л. Н. Соотношения между работами сил трения качения и скольжения в парадоксе Герона / Л. Н. Бондаренко, Т. В. Матвиец, В. Д. Бондаренко // Efektivní nástroje moderních věd–2011 : materiály VI mezinárodní vědecko-praktická konference (27.05–05.06.2011). – Praha, 2011. – P. 27–79.
4. Волков, Н. Н. Подшипники качения колесных пар вагонов и локомотивов. Исследование, расчет и конструирование / Н. Н. Волков, Н. В. Родзевич. – Москва : Машиностроение, 1972. – 167 с.
5. Гура, Г. С. Качение тел с трением. Фреттинг : монография / Г. С. Гура. – Сочи : Дория, 2009. – 295 с.
6. Джонсон, К. Механика контактного взаимодействия / К. Джонсон. – Москва : Мир, 1989. – 510 с.
7. Дяченко, П. В. Моделювання впливу підшип-ників кочення на демпфування коливань у зачепленні зубчастих коліс / П. В. Дяченко // Вісн. Дніпропетр. нац. ун-ту залізн. трансп. ім. акад. В. Лазаряна. – Дніпропетровськ, 2011. – Вип. 36. – С. 16–24.
8. Иванов, М. Н. Детали машин / М. Н. Иванов. – Москва : Высш. шк., 1975. – 551 с.
9. Карпенко, В. А. Взаимозаменяемость, стандартизация и технические измерения : учеб. пособие для вузов / В. А. Карпенко. – Севастополь : Изд-во СевНТУ, 2007. – 372 с.
10. Кожевников, С. Н. Теория механизмов и машин / С. Н. Кожевников. – Москва : Машиностроение, 1969. – 584 с.
11. Писаренко, Г. С. Справочник по сопро-тивлению материалов / Г. С. Писаренко, А. П. Яковлев, В. В. Матвеев. – 2-е изд., перераб. и доп. – Киев : Наук. думка, 1988. – 736 с.
12. Справочник по кранам. В 2 т. Т. 2 / М. П. Алек-сандров, М. М. Гохберг, А. А. Ковин [и др.]. – Ленинград : Машиностроение,1988. – 559 с.
13. Умови кочення без проковзування тіл при різних схемах дотику / Л. М. Бондаренко, С. О. Яковлєв, І. Е. Крамар, О. І. Шаптала // Conduct of modern science–2014 (30.11–7.12.2014) : Materials of the X Intern. Sci. and Practical Conf. – Sheffield, 2014. – T. 23. – P. 12–17.
14. Multi-scale finite element modeling to describe rolling contact fatigue in a wheel–rail test rig / M. Pletz, W. Daves, W. Yao [et al.] // Tribology International. – 2014. – Vol. 80. – P. 147–155. doi: 10.1016/j.triboint.-2014.07.005.
15. Reynolds, O. On rolling friction / O. Reynolds // Proc. of the Royal Society of London. – 1874. – Vol. 23. – Iss. 156-163. – P. 506–509. doi: 10.1098/rspl.1874.0080 .
16. Tabor, D. The mechanism of Rolling Friction. II. The Elastic Range / D. Tabor // Proc. of the Royal Society A: Mathematical, Physical and Engi-neering Sciences. – 1955. – Vol. 229. – Iss. 1177. – P. 198–220. doi: 10.1098/rspa.1955.0082.

DOI: https://doi.org/10.15802/stp2016/74760