DOI: https://doi.org/10.15802/stp2016/74768

### ONE-TO-ONE NONLINEAR TRANSFORMATION OF THE SPACE WITH IDENTITY PLANE

A. D. Malyi, T. V. Ulchenko, A. S. Shcherbak, Yu. Ya. Popudniak, T. V. Starosolskaya

#### Abstract

Purpose. Study of geometric transformations. We will consider the so-called point transformations of space. Methodology. The most important are one-to-one transformations. They allow exploring and studying the properties of the transformed object using the properties of the original object (line, surface and figure) and the properties of the transformation. Cremona transformations occupy a special place in the set of one-to-one nonlinear transformations. Construction of one-parameter (stratifiable) transformations is carried out as one-parameter set of plane transformations, both linear and non-linear ones. The plane, in which the specific transformation is prescribed, moves in space by a certain law forming a one-parameter set of planes. The set of such plane transformations makes up the space transformation. Findings. The designed graphics algorithms and the established transformation equations allow building the visual images of transformed surfaces and conducting their research by analytical geometry methods. Originality. By completing elementary algebraic transformations of this equation, we obtain the cissoids equation. If the plane  is continuously moved parallel to itself, it results in occurrence of surface, whose carcass will be the set of cissoids and the set of front-projecting lines. Practical value. The considered set of stratifiable algebraic transformations gives an effective means for exploring new curves and surfaces obtained by transforming the known algebraic lines and surfaces. These graphic algorithms allow graphically depicting the transformed lines and surfaces. The considered procedure of drawing up analytical formulas of specific transformations allows us to study the transformed surfaces and lines using the methods of analytic geometry. The above transformations can be of arbitrary high order, which is especially important during the design of complex technical surfaces such as aircraft components, parts of water and gas turbines, supports of the structures subject to strong flow of liquid, etc. Space modelling issues, including the building of graphic plane models of space, are relevant both in theoretical terms and in terms of application of the non-linear surfaces investigated on their basis for constructing the technical forms of parts and aggregates of construction machine movable elements, the middle surfaces of shells, the surfaces of turbulent blade, etc.

#### Keywords

space modelling; quasi-linear model; space transformation; non-linear surface; graphic design; axiomatic design

#### Full Text:

PDF TRANSLATION (Русский)

#### References

Byushgens S.S. Differentsialnaya geometriya [Differential geometry]. Moskow;Leningrad, Gosudarstvennoye izdatelstvovo tekhniko-teoreticheskoy literatury Publ., 1940. 300 p.

Dzhaparidze I.S., Saakyan G.S. Preobrazovaniye prostranstva na baze odnoparametricheskikh semeystv ploskostnykh preobrazovaniy [Transformation of the space on the basis of one-parameter families of the plane transformations]. Nachertatelnaya geometriyaDescriptive Geometry, 1974, no. 6, pp. 12-15.

Yermakov A.V. Rasslaivayemyye kubicheskiye involyutsii prostranstva s invariantnoy kvadrikoy [Stratified cubic involutions of the space with invariant quadric]. Vzaimnoodnoznachnyye sootvetstviya v proyektirovanii mashin lesnoy promyshlennosti [One-to-one correspondence in the design of machines for wood industry], 1973, issue 54, pp. 51-57.

Ivanov G.S. K voprosu modelirovaniya algebraicheskikh poverkhnostey tsentralnymi kremonovymi preobrazovaniyami [On the issue of modeling of algebraic surfaces using the central Cremonatransformations]. Vzaimnoodnoznachnyye sootvetstviya v proyektirovanii mashin lesnoy promyshlennosti [One-to-one correspondence in the design of machines for wood industry], 1973, issue 54, pp. 80-92.

Ivanov G.S. Kremonovy preobrazovaniya ploskosti i prostranstva [Cremonatransformations of the plane and space]. Kremonovy preobrazovaniya i ikh prilozheniya [Cremona transformations and their applications], 1971, issue 39, pp. 85-119.

Malyy A.D., Popudnyak Yu.Ya., Ulchenko T.V., Starosolskaya T.V. Kvazilineynyye graficheskiye modeli prostranstva [Quasi-linear graphical model of space]. Mosty ta tuneli: teoriia, doslidzhennia, praktyka [Bridges and Tunnels: Theory, Research, Practice], 2014, issue 5, pp. 51-56.

Ploskiy V.A., Gurak V.M. Razrabotka invariantnoy podsistemy geometricheskogo modelirovaniya obyektov slozhnoy formy [Development of invariant subsystem for geometric modeling of complex form objects]. Avtometriya – Autometering, 1990, no. 4, pp. 47-50.

Ploskyi V.O. Aproksymatsiia alhorytmiv heometrychnoho modeliuvannia v zadachakh perezadannia poverkhon [Approximation of algorithms for geometric modeling in problems of surfaces resetting]. Inzhenerna heodeziia – Engineering Geodesy, 1998, no. 40, pp. 161-164.

Popudniak Yu.Ya., Ulchenko T.V., Shcherbak A.S. Nablyzheni rozghortky sfery [Reamers of sphere are closed]. Visnyk Dnipropetrovskoho natsionalnoho universytetu zaliznychnoho transportu imeni akademika V. Lazariana [Bulletin of Dnipropetrovsk National Univesity of Railway Transport named after Academician V. Lazaryan], 2011, issue 38, pp. 162-164.

Savelov A.A. Ploskiye krivyye [Plane curves]. Moskow, Gosudarstvennoye izdatelstvo fiziko-matematicheskoy literatury Publ., 1960, 293 p.

Hadson H.Р. Cremone transformations in plane and space.CambridgeUniversityPress Publ., 1927. 454 p.

Hassanzadeh F.F., Milenkovic O. An Axiomatic Approach to Constructing Distances for Rank Comparison and Aggregation. IEEE Transactions on Information Theory, 2014, vol. 60, issue 10, pp. 6417-6439. doi: 10.1109/TIT.2014.2345760.

Xu Х., Lee L. A spatial autoregressive model with a nonlinear transformation of the dependent variable. Journal of Econometrics, 2015, vol. 186, issue 1, pp. 1-18. doi:10.1016/j. jeconom. 2014.12.005.

#### GOST Style Citations

1. Бюшгенс, С. С. Дифференциальная геометрия / С. С. Бюшгенс. – Москва ; Ленинград : Гос. изд-во технико-теоретич. лит-ры, 1940. – 300 с.
2. Джапаридзе, И. С. Преобразование пространства на базе однопараметрических семейств плоскостных преобразований / И. С. Джапаридзе, Г. С. Саакян // Начертательная геометрия : науч. тр. / Грузин. политехн. ин-т. – Тбилиси, 1974. – № 6. – С. 12–15.
3. Ермаков, А. В. Расслаиваемые кубические инволюции пространства с инвариантной квадрикой / А. В. Ермаков // Взаимно однозначные соответствия в проектировании машин лесной промышленности : науч. тр. / Моск. лесотехн. ин-т. – Москва, 1973. – № 54. – С. 51–57.
4. Иванов, Г. С. К вопросу моделирования алгебраических поверхностей центральными кремоновыми преобразованиями / Г. С. Иванов // Взаимно однозначные соответствия в проектировании машин лесной промышленности : науч. тр. / Моск. лесотехн. ин-т. – Москва, 1973. – № 54. – С. 80–92.
5. Иванов, Г. С. Кремоновы преобразования плоскости и пространства / Г. С. Иванов // Кремоновы преобразования и их приложения : науч. тр. / Моск. лесотехн. ин-т. – Москва, 1971. – № 39. – С. 85–119.
6. Квазилинейные графические модели пространства / А. Д. Малый, Ю. Я. Попудняк, Т. В. Ульченко, Т. В. Старосольская // Мости та тунелi: теорія, дослідження, практика. – 2014. – Вип. 5. – С. 51–56.
7. Плоский, В. А. Разработка инвариантной подсистемы геометрического моделирования объектов сложной формы / В. А. Плоский, В. М. Гурак // Автометрия. – 1990. – № 4. – С. 47–50.
8. Плоский, В. О. Апроксимація алгоритмів геометричного моделювання в задачах перезадання поверхонь / В. О. Плоский // Інженерна геодезія. – 1998. – № 40. – с. 161–164.
9. Попудняк, Ю. Я. Наближені розгортки сфери / Ю. Я. Попудняк, Т. В. Ульченко, А. С. Щербак // Вісн. Дніпропетр. нац. ун-ту залізн. трансп. ім. акад. В. Лазаряна. – Дніпропетровськ, 2011. – Вип. 38. − С. 162–164.
10. Савелов, А. А. Плоские кривые : справ. рук-во / А. А. Савелов. – Москва : Гос. изд-во физико-матем. лит-ры, 1960. – 293 с.
11. Hadson, H. Р. Cremona Transformations in Рlane and Space. – Cambridge : Cambridge University Press, 1927. – 454 p.
12. Hassanzadeh, F. F. An Axiomatic Approach to Constructing Distances for Rank Comparison and Aggregation / F. F. Hassanzadeh,
O. Milenkovic // IEEE Transactions on Information Theory. – 2014. – Vol. 60. – Iss. 10. – P. 6417–6439. doi: 10.1109/TIT.2014.2345760.
13. Xu, Х. A spatial autoregressive model with a nonlinear transformation of the dependent variable / Х. Xu, L. Lee // J. of Econometrics. – 2015. – Vol. 186. – Iss. 1. – P. 1–18. doi:10.1016/j. jeconom. 2014.12.005.

### Cited-by:

1. DESIGNING OF DEVELOPED SURFACES OF COMPLEX PARTS
S. S. Tyshchenko, A. V. Krasniuk, T. V. Ulchenko, A. S. Shcherbak
Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport  Issue: 2(68)  First page: 148  Year: 2017
doi: 10.15802/stp2017/100227